Introduction to Electronics
(Redirected from EE Introduction to Electronics)
- Introduction to Electronics/Electronics Engineering
Back to: Topic:Electronic Engineering
Welcome to the course EE 90.
|
Syllabus
[edit | edit source]Lab Materials
[edit | edit source]Lecture plan
[edit | edit source]Basic test equipment, intro to breadboarding, basic spice, soldering and schematic basics.
- EE 90 Introduction to Electronics
- Lecture 1, Basic test equipment
- DMM, Power Supply, Oscilloscopes, Signal Generator
- Lecture 2, Smart test equipment
- Spectrum Analyzer, Logic Analyzers, Digital Storage Oscilloscopes ...
- Lecture 3, Mounting Techniques
- Breadboards, Wire Wrap
- Lecture 3, Soldering
- Prep work, Technique, Through hole, SMT, Bulk Methods, Rework
- Lecture 4, Schematics
- Schematics, Ladder Logic Diagrams
- Lecture 1, Basic test equipment
- Mid-term Exam
- Lecture #, name
- descrption
- Lecture #, name
- Final Exam
Datasheets Relevant
[edit | edit source]74=Lower Voltage 40=Higher Voltage
Gates
[edit | edit source]| Unless noted | 2-6V | 2-6V | 2-6V | 2-6V | 3-18V | 3-18V | 3-18V | 3-18V |
|---|---|---|---|---|---|---|---|---|
| Unless noted | DUAL | TRIPLE | QUAD | OCTAL | DUAL | TRIPLE | QUAD | OCTAL |
| NOT | 6 Inverters (TI CD74HC04) |
(TI CD74HC240) | 6 Inverters (TI CD4009UB) |
|||||
| AND | 4 Input (TI SN74HC21) |
3 Input (TI SN74HC11) |
2 Input (TI SN74HC08) |
4 Input (TI CD4081B) |
3 Input (TI CD4073B) |
2 Input (TI CD4082B) |
1 Gate 8 Input (TI CD4068B) | |
| NAND | 4 Input (TI CD74HC20) |
3 Input (TI CD74HC10) |
2 Input (TI CD74HC00) |
1 Gate 8 Input (TI CD74HC30) |
2 Input (TI CD40107B) |
2 Input (TI CD4011B) |
1 Gate 8 Input (TI CD4068B) | |
| OR | 3 Input (TI CD74HC4075) |
2 Input (TI SN74HC32) |
4 Input (TI CD4072B) |
3 Input (TI CD4075B) |
2 Input (TI CD4071B) |
1 Gate 8 Input (TI CD4078B) | ||
| NOR | 4 Input (TI CD74HC4002) |
3 Input (TI CD74HC27) |
2 Input (TI CD74HC02) |
4 Input (TI CD4002B) |
3 Input (TI CD4025B) |
2 Input (TI CD4001B) |
1 Gate 8 Input (TI CD4078B) | |
| XOR | 2 Input (TI SN74HC86) |
2 Input (TI CD4030B) |
||||||
| XNOR | 2 Input (TI SN74HC266) |
2 Input (TI CD4077B) |
||||||
| JK Flip Flop /SR latch |
(TI CD74HC112) | (TI CD4027) | ||||||
| D Flip Flop | (TI CD74HC74) | (TI CD74HC175) | (TI CD74HC273) | (TI CD4013) | (TI CD40175) |
specialty
[edit | edit source]| 3-18V | 4-Bit Magnitude Comparator (TI CD4063B) | |||
|---|---|---|---|---|
| 2-6V | Full Adder 4bit (TI CD74HC283) |
9-Bit Odd/Even Parity Generator/Checker (TI CD74HC280) |
8-Bit Identity/ Magnitude Comparators (TI SN74HC682) |
4-Bit Magnitude Comparator (TI CD74HC85) |
| 3-18V | Presettable Up/Down Counter (TI CD4029B) |
Presettable Divide-By-N Counter(TI CD4018B) |
||
| 2-6V | Presettable Up/Down Counter (TI SN74HC191) |
12-Bit Asynchronous Bin Counter (TI SN74HC4040) |
||
| 3-18V | BCD-to-Decimal or Binary-to-Octal 4to10 demux (TI CD4028B) |
BCD-to-hex or 4to16 demux (TI CD4515B) |
2bit to 1-4 selector demux DUAL (TI CD4556B) |
|
| 2-6V | BCD-to-Decimal or Binary-to-Octal 4to10 demux (TI SN74HC42) |
BCD-to-hex or 4to16 demux (TI CD74HC154) |
2bit to 1-4 selector demux DUAL (TI CD74HC139) |
BCD-to-7 Segment LED Latch/Decoder/Driver (TI CD74HC4511) |
Reference books
[edit | edit source]- Digital Design Principles and Practices by John F. Wakerly
- Navy Electricity and Electronics Training Series
Online resources
[edit | edit source]Learning projects
[edit | edit source]Research projects
[edit | edit source]News
[edit | edit source]Wikiversity activities
[edit | edit source]Active participants
[edit | edit source]To do
[edit | edit source]See also
[edit | edit source]Back to: Topic:Electronic Engineering
 |
Educational level: this is a tertiary (university) resource. |
 |
Type classification: this resource is a course. |
 |
Subject classification: this is an engineering resource. |
 |
Completion status: About halfway there. You may help to clarify and expand it. |