QB/a15Thermodynamics heatEngine
< QB
- Quizbank now resides on MyOpenMath at https://www.myopenmath.com (although I hope Wikiversity can play an important role in helping students and teachers use these questions!)
- At the moment, most of the physics questions have already been transferred. To see them, join myopenmath.com as a student, and "enroll" in one or both of the following courses:
- Quizbank physics 1 (id 60675)
- Quizbank physics 2 (id 61712)
- Quizbank astronomy (id 63705)
The enrollment key for each course is 123. They are all is set to practice mode, giving students unlimited attempts at each question. Instructors can also print out copies of the quiz for classroom use. If you have any problems leave a message at user talk:Guy vandegrift.
- Latest essay: MyOpenMath/Pulling loose threads
- Latest lesson: Phasor algebra
See special:permalink/1863334 for a wikitext version of this quiz.
LaTexMarkup begin
[edit | edit source]%[[File:Quizbankqb_{{SUBPAGENAME}}.pdf|thumb|See[[:File:Quizbankqb_{{SUBPAGENAME}}.pdf]]]]
%CurrentID: {{REVISIONID}}
%PDF: [[:File:Quizbankqb_{{SUBPAGENAME}}.pdf]]%Required images: [[file:Wikiversity-logo-en.svg|45px]] [[File:Thermodynamic cycles for quizzes.svg|45px]]
%This code creates both the question and answer key using \newcommand\mytest
%%% EDIT QUIZ INFO HERE %%%%%%%%%%%%%%%%%%%%%%%%%%%
\newcommand{\quizname}{QB/a15Thermodynamics_heatEngine}
\newcommand{\quiztype}{numerical}%[[Category:QB/numerical]]
%%%%% PREAMBLE%%%%%%%%%%%%
\newif\ifkey %estabkishes Boolean ifkey to turn on and off endnotes
\documentclass[11pt]{exam}
\RequirePackage{amssymb, amsfonts, amsmath, latexsym, verbatim,
xspace, setspace,datetime}
\RequirePackage{tikz, pgflibraryplotmarks, hyperref}
\usepackage[left=.5in, right=.5in, bottom=.5in, top=.75in]{geometry}
\usepackage{endnotes, multicol,textgreek} %
\usepackage{graphicx} %
\singlespacing %OR \onehalfspacing OR \doublespacing
\parindent 0ex % Turns off paragraph indentation
\hypersetup{ colorlinks=true, urlcolor=blue}
% BEGIN DOCUMENT
\begin{document}
\title{a15Thermodynamics\_heatEngine}
\author{The LaTex code that creates this quiz is released to the Public Domain\\
Attribution for each question is documented in the Appendix}
\maketitle
\begin{center}
\includegraphics[width=0.15\textwidth]{666px-Wikiversity-logo-en.png}
\\Latex markup at\\
\footnotesize{ \url{https://en.wikiversity.org/wiki/special:permalink/1863334}}
\end{center}
\begin{frame}{}
\begin{multicols}{3}
\tableofcontents
\end{multicols}
\end{frame}
\pagebreak\section{Quiz}
\keytrue
\printanswers
\begin{questions}
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 2.8 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 1.4 kPa, P\textsubscript{2}= 2.8 kPa. The volumes are V\textsubscript{1}= 2.8m\textsuperscript{3} and V\textsubscript{4}= 5.1m\textsuperscript{3}. How much work is done in in one cycle?\ifkey\endnote{a15Thermodynamics\_heatEngine\_1 placed in Public Domain by Guy Vandegrift: {\url{https://en.wikiversity.org/wiki/special:permalink/1863334}}}\fi
\begin{choices}
\choice 5.09 x 10\textsuperscript{2} J
\CorrectChoice 1.61 x 10\textsuperscript{3} J
\choice 5.09 x 10\textsuperscript{3} J
\choice 1.61 x 10\textsuperscript{4} J
\choice 5.09 x 10\textsuperscript{4} J
\end{choices}
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 2.6 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 3 kPa, P\textsubscript{2}= 5.9 kPa. The volumes are V\textsubscript{1}= 2.5m\textsuperscript{3} and V\textsubscript{4}= 3.6m\textsuperscript{3}. How much work is involved between 1 and 4?\ifkey\endnote{a15Thermodynamics\_heatEngine\_2 placed in Public Domain by Guy Vandegrift: {\url{https://en.wikiversity.org/wiki/special:permalink/1863334}}}\fi
\begin{choices}
\choice 3.3 x 10\textsuperscript{2} J
\choice 1.04 x 10\textsuperscript{3} J
\CorrectChoice 3.3 x 10\textsuperscript{3} J
\choice 1.04 x 10\textsuperscript{4} J
\choice 3.3 x 10\textsuperscript{4} J
\end{choices}
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 2.1 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 1.2 kPa, P\textsubscript{2}= 4.1 kPa. The volumes are V\textsubscript{1}= 3.1m\textsuperscript{3} and V\textsubscript{4}= 4.3m\textsuperscript{3}. How much work is involved between 2 and 4?\ifkey\endnote{a15Thermodynamics\_heatEngine\_3 placed in Public Domain by Guy Vandegrift: {\url{https://en.wikiversity.org/wiki/special:permalink/1863334}}}\fi
\begin{choices}
\choice 1.01 x 10\textsuperscript{3} J
\CorrectChoice 3.18 x 10\textsuperscript{3} J
\choice 1.01 x 10\textsuperscript{4} J
\choice 3.18 x 10\textsuperscript{4} J
\choice 1.01 x 10\textsuperscript{5} J
\end{choices}
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 1.4 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 2.2 kPa, P\textsubscript{2}= 4 kPa. The volumes are V\textsubscript{1}= 1.4m\textsuperscript{3} and V\textsubscript{4}= 3.3m\textsuperscript{3}. What is the temperature at step 4?\ifkey\endnote{a15Thermodynamics\_heatEngine\_4 placed in Public Domain by Guy Vandegrift: {\url{https://en.wikiversity.org/wiki/special:permalink/1863334}}}\fi
\begin{choices}
\choice 1.97 x 10\textsuperscript{2} K
\CorrectChoice 6.24 x 10\textsuperscript{2} K
\choice 1.97 x 10\textsuperscript{3} K
\choice 6.24 x 10\textsuperscript{3} K
\choice 1.97 x 10\textsuperscript{4} K
\end{choices}
\end{questions}
\newpage\section{Renditions}
\subsection{}%%%% subsection 1
\begin{questions} %%%%%%% begin questions
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 2.1 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 2.2 kPa, P\textsubscript{2}= 4.4 kPa. The volumes are V\textsubscript{1}= 2.6m\textsuperscript{3} and V\textsubscript{4}= 4m\textsuperscript{3}. How much work is done in in one cycle?
\begin{choices} %%%%%%% begin choices
\choice 4.87 x 10\textsuperscript{1} J
\choice 1.54 x 10\textsuperscript{2} J
\choice 4.87 x 10\textsuperscript{2} J
\CorrectChoice 1.54 x 10\textsuperscript{3} J
\choice 4.87 x 10\textsuperscript{3} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 2.1 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 2.8 kPa, P\textsubscript{2}= 5.6 kPa. The volumes are V\textsubscript{1}= 2.1m\textsuperscript{3} and V\textsubscript{4}= 4.8m\textsuperscript{3}. How much work is done in in one cycle?
\begin{choices} %%%%%%% begin choices
\choice 3.78 x 10\textsuperscript{2} J
\choice 1.2 x 10\textsuperscript{3} J
\CorrectChoice 3.78 x 10\textsuperscript{3} J
\choice 1.2 x 10\textsuperscript{4} J
\choice 3.78 x 10\textsuperscript{4} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 3.1 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 2.5 kPa, P\textsubscript{2}= 4.5 kPa. The volumes are V\textsubscript{1}= 1.4m\textsuperscript{3} and V\textsubscript{4}= 2.9m\textsuperscript{3}. How much work is done in in one cycle?
\begin{choices} %%%%%%% begin choices
\choice 4.74 x 10\textsuperscript{2} J
\CorrectChoice 1.5 x 10\textsuperscript{3} J
\choice 4.74 x 10\textsuperscript{3} J
\choice 1.5 x 10\textsuperscript{4} J
\choice 4.74 x 10\textsuperscript{4} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 1.6 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 1.9 kPa, P\textsubscript{2}= 3.6 kPa. The volumes are V\textsubscript{1}= 1.6m\textsuperscript{3} and V\textsubscript{4}= 3.3m\textsuperscript{3}. How much work is done in in one cycle?
\begin{choices} %%%%%%% begin choices
\choice 4.57 x 10\textsuperscript{1} J
\choice 1.45 x 10\textsuperscript{2} J
\choice 4.57 x 10\textsuperscript{2} J
\CorrectChoice 1.45 x 10\textsuperscript{3} J
\choice 4.57 x 10\textsuperscript{3} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 1.1 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 2 kPa, P\textsubscript{2}= 4.1 kPa. The volumes are V\textsubscript{1}= 2.1m\textsuperscript{3} and V\textsubscript{4}= 4.3m\textsuperscript{3}. How much work is done in in one cycle?
\begin{choices} %%%%%%% begin choices
\choice 7.3 x 10\textsuperscript{2} J
\CorrectChoice 2.31 x 10\textsuperscript{3} J
\choice 7.3 x 10\textsuperscript{3} J
\choice 2.31 x 10\textsuperscript{4} J
\choice 7.3 x 10\textsuperscript{4} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 2.9 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 2.3 kPa, P\textsubscript{2}= 4.8 kPa. The volumes are V\textsubscript{1}= 2.1m\textsuperscript{3} and V\textsubscript{4}= 3.5m\textsuperscript{3}. How much work is done in in one cycle?
\begin{choices} %%%%%%% begin choices
\choice 1.75 x 10\textsuperscript{1} J
\choice 5.53 x 10\textsuperscript{1} J
\choice 1.75 x 10\textsuperscript{2} J
\choice 5.53 x 10\textsuperscript{2} J
\CorrectChoice 1.75 x 10\textsuperscript{3} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 1.9 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 1.2 kPa, P\textsubscript{2}= 2.9 kPa. The volumes are V\textsubscript{1}= 2.6m\textsuperscript{3} and V\textsubscript{4}= 4.7m\textsuperscript{3}. How much work is done in in one cycle?
\begin{choices} %%%%%%% begin choices
\choice 5.64 x 10\textsuperscript{2} J
\CorrectChoice 1.79 x 10\textsuperscript{3} J
\choice 5.64 x 10\textsuperscript{3} J
\choice 1.79 x 10\textsuperscript{4} J
\choice 5.64 x 10\textsuperscript{4} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 2 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 2.9 kPa, P\textsubscript{2}= 4 kPa. The volumes are V\textsubscript{1}= 2m\textsuperscript{3} and V\textsubscript{4}= 3.2m\textsuperscript{3}. How much work is done in in one cycle?
\begin{choices} %%%%%%% begin choices
\choice 6.6 x 10\textsuperscript{0} J
\choice 2.09 x 10\textsuperscript{1} J
\choice 6.6 x 10\textsuperscript{1} J
\choice 2.09 x 10\textsuperscript{2} J
\CorrectChoice 6.6 x 10\textsuperscript{2} J
\pagebreak
\end{choices}
\end{questions}%%%%%%%% end questions
\subsection{}%%%% subsection 2
\begin{questions} %%%%%%% begin questions
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 1.2 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 2.7 kPa, P\textsubscript{2}= 3.8 kPa. The volumes are V\textsubscript{1}= 1.8m\textsuperscript{3} and V\textsubscript{4}= 4.7m\textsuperscript{3}. How much work is involved between 1 and 4?
\begin{choices} %%%%%%% begin choices
\CorrectChoice 7.83 x 10\textsuperscript{3} J
\choice 2.48 x 10\textsuperscript{4} J
\choice 7.83 x 10\textsuperscript{4} J
\choice 2.48 x 10\textsuperscript{5} J
\choice 7.83 x 10\textsuperscript{5} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 2.4 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 2.1 kPa, P\textsubscript{2}= 3.2 kPa. The volumes are V\textsubscript{1}= 1.1m\textsuperscript{3} and V\textsubscript{4}= 2.2m\textsuperscript{3}. How much work is involved between 1 and 4?
\begin{choices} %%%%%%% begin choices
\choice 2.31 x 10\textsuperscript{2} J
\choice 7.3 x 10\textsuperscript{2} J
\CorrectChoice 2.31 x 10\textsuperscript{3} J
\choice 7.3 x 10\textsuperscript{3} J
\choice 2.31 x 10\textsuperscript{4} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 2 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 1.5 kPa, P\textsubscript{2}= 2.7 kPa. The volumes are V\textsubscript{1}= 1.9m\textsuperscript{3} and V\textsubscript{4}= 3.3m\textsuperscript{3}. How much work is involved between 1 and 4?
\begin{choices} %%%%%%% begin choices
\choice 6.64 x 10\textsuperscript{2} J
\CorrectChoice 2.1 x 10\textsuperscript{3} J
\choice 6.64 x 10\textsuperscript{3} J
\choice 2.1 x 10\textsuperscript{4} J
\choice 6.64 x 10\textsuperscript{4} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 1.2 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 1.1 kPa, P\textsubscript{2}= 3.5 kPa. The volumes are V\textsubscript{1}= 1.2m\textsuperscript{3} and V\textsubscript{4}= 2.5m\textsuperscript{3}. How much work is involved between 1 and 4?
\begin{choices} %%%%%%% begin choices
\choice 1.43 x 10\textsuperscript{1} J
\choice 4.52 x 10\textsuperscript{1} J
\choice 1.43 x 10\textsuperscript{2} J
\choice 4.52 x 10\textsuperscript{2} J
\CorrectChoice 1.43 x 10\textsuperscript{3} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 1.3 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 1.6 kPa, P\textsubscript{2}= 4.3 kPa. The volumes are V\textsubscript{1}= 1.6m\textsuperscript{3} and V\textsubscript{4}= 3.2m\textsuperscript{3}. How much work is involved between 1 and 4?
\begin{choices} %%%%%%% begin choices
\CorrectChoice 2.56 x 10\textsuperscript{3} J
\choice 8.1 x 10\textsuperscript{3} J
\choice 2.56 x 10\textsuperscript{4} J
\choice 8.1 x 10\textsuperscript{4} J
\choice 2.56 x 10\textsuperscript{5} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 2.8 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 1.5 kPa, P\textsubscript{2}= 2.7 kPa. The volumes are V\textsubscript{1}= 1.9m\textsuperscript{3} and V\textsubscript{4}= 4.4m\textsuperscript{3}. How much work is involved between 1 and 4?
\begin{choices} %%%%%%% begin choices
\choice 3.75 x 10\textsuperscript{2} J
\choice 1.19 x 10\textsuperscript{3} J
\CorrectChoice 3.75 x 10\textsuperscript{3} J
\choice 1.19 x 10\textsuperscript{4} J
\choice 3.75 x 10\textsuperscript{4} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 1.3 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 3.1 kPa, P\textsubscript{2}= 4.3 kPa. The volumes are V\textsubscript{1}= 1.1m\textsuperscript{3} and V\textsubscript{4}= 2.8m\textsuperscript{3}. How much work is involved between 1 and 4?
\begin{choices} %%%%%%% begin choices
\choice 1.67 x 10\textsuperscript{3} J
\CorrectChoice 5.27 x 10\textsuperscript{3} J
\choice 1.67 x 10\textsuperscript{4} J
\choice 5.27 x 10\textsuperscript{4} J
\choice 1.67 x 10\textsuperscript{5} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 2.2 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 2.2 kPa, P\textsubscript{2}= 3.7 kPa. The volumes are V\textsubscript{1}= 1.8m\textsuperscript{3} and V\textsubscript{4}= 4.4m\textsuperscript{3}. How much work is involved between 1 and 4?
\begin{choices} %%%%%%% begin choices
\choice 1.81 x 10\textsuperscript{2} J
\choice 5.72 x 10\textsuperscript{2} J
\choice 1.81 x 10\textsuperscript{3} J
\CorrectChoice 5.72 x 10\textsuperscript{3} J
\choice 1.81 x 10\textsuperscript{4} J
\pagebreak
\end{choices}
\end{questions}%%%%%%%% end questions
\subsection{}%%%% subsection 3
\begin{questions} %%%%%%% begin questions
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 1.1 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 1.4 kPa, P\textsubscript{2}= 2.8 kPa. The volumes are V\textsubscript{1}= 2.7m\textsuperscript{3} and V\textsubscript{4}= 4.6m\textsuperscript{3}. How much work is involved between 2 and 4?
\begin{choices} %%%%%%% begin choices
\choice 3.99 x 10\textsuperscript{1} J
\choice 1.26 x 10\textsuperscript{2} J
\choice 3.99 x 10\textsuperscript{2} J
\choice 1.26 x 10\textsuperscript{3} J
\CorrectChoice 3.99 x 10\textsuperscript{3} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 3 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 1.3 kPa, P\textsubscript{2}= 3.7 kPa. The volumes are V\textsubscript{1}= 1.1m\textsuperscript{3} and V\textsubscript{4}= 2.2m\textsuperscript{3}. How much work is involved between 2 and 4?
\begin{choices} %%%%%%% begin choices
\choice 8.7 x 10\textsuperscript{2} J
\CorrectChoice 2.75 x 10\textsuperscript{3} J
\choice 8.7 x 10\textsuperscript{3} J
\choice 2.75 x 10\textsuperscript{4} J
\choice 8.7 x 10\textsuperscript{4} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 2.9 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 1.7 kPa, P\textsubscript{2}= 3.1 kPa. The volumes are V\textsubscript{1}= 2.8m\textsuperscript{3} and V\textsubscript{4}= 4.3m\textsuperscript{3}. How much work is involved between 2 and 4?
\begin{choices} %%%%%%% begin choices
\CorrectChoice 3.6 x 10\textsuperscript{3} J
\choice 1.14 x 10\textsuperscript{4} J
\choice 3.6 x 10\textsuperscript{4} J
\choice 1.14 x 10\textsuperscript{5} J
\choice 3.6 x 10\textsuperscript{5} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 1.9 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 2.3 kPa, P\textsubscript{2}= 5.3 kPa. The volumes are V\textsubscript{1}= 1.8m\textsuperscript{3} and V\textsubscript{4}= 3m\textsuperscript{3}. How much work is involved between 2 and 4?
\begin{choices} %%%%%%% begin choices
\choice 1.44 x 10\textsuperscript{2} J
\choice 4.56 x 10\textsuperscript{2} J
\choice 1.44 x 10\textsuperscript{3} J
\CorrectChoice 4.56 x 10\textsuperscript{3} J
\choice 1.44 x 10\textsuperscript{4} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 2.5 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 2 kPa, P\textsubscript{2}= 3.2 kPa. The volumes are V\textsubscript{1}= 1.1m\textsuperscript{3} and V\textsubscript{4}= 3.1m\textsuperscript{3}. How much work is involved between 2 and 4?
\begin{choices} %%%%%%% begin choices
\choice 1.64 x 10\textsuperscript{3} J
\CorrectChoice 5.2 x 10\textsuperscript{3} J
\choice 1.64 x 10\textsuperscript{4} J
\choice 5.2 x 10\textsuperscript{4} J
\choice 1.64 x 10\textsuperscript{5} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 2.5 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 1.7 kPa, P\textsubscript{2}= 4.5 kPa. The volumes are V\textsubscript{1}= 1.6m\textsuperscript{3} and V\textsubscript{4}= 2.7m\textsuperscript{3}. How much work is involved between 2 and 4?
\begin{choices} %%%%%%% begin choices
\choice 1.08 x 10\textsuperscript{3} J
\CorrectChoice 3.41 x 10\textsuperscript{3} J
\choice 1.08 x 10\textsuperscript{4} J
\choice 3.41 x 10\textsuperscript{4} J
\choice 1.08 x 10\textsuperscript{5} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 2.5 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 3 kPa, P\textsubscript{2}= 5.4 kPa. The volumes are V\textsubscript{1}= 2.6m\textsuperscript{3} and V\textsubscript{4}= 5m\textsuperscript{3}. How much work is involved between 2 and 4?
\begin{choices} %%%%%%% begin choices
\choice 1.01 x 10\textsuperscript{2} J
\choice 3.19 x 10\textsuperscript{2} J
\choice 1.01 x 10\textsuperscript{3} J
\choice 3.19 x 10\textsuperscript{3} J
\CorrectChoice 1.01 x 10\textsuperscript{4} J
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 2.9 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 1.3 kPa, P\textsubscript{2}= 3.4 kPa. The volumes are V\textsubscript{1}= 2.5m\textsuperscript{3} and V\textsubscript{4}= 4.3m\textsuperscript{3}. How much work is involved between 2 and 4?
\begin{choices} %%%%%%% begin choices
\choice 1.34 x 10\textsuperscript{2} J
\choice 4.23 x 10\textsuperscript{2} J
\choice 1.34 x 10\textsuperscript{3} J
\CorrectChoice 4.23 x 10\textsuperscript{3} J
\choice 1.34 x 10\textsuperscript{4} J
\pagebreak
\end{choices}
\end{questions}%%%%%%%% end questions
\subsection{}%%%% subsection 4
\begin{questions} %%%%%%% begin questions
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 2.5 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 2.9 kPa, P\textsubscript{2}= 4.9 kPa. The volumes are V\textsubscript{1}= 2.5m\textsuperscript{3} and V\textsubscript{4}= 4.7m\textsuperscript{3}. What is the temperature at step 4?
\begin{choices} %%%%%%% begin choices
\choice 2.07 x 10\textsuperscript{2} K
\CorrectChoice 6.56 x 10\textsuperscript{2} K
\choice 2.07 x 10\textsuperscript{3} K
\choice 6.56 x 10\textsuperscript{3} K
\choice 2.07 x 10\textsuperscript{4} K
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 1.3 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 1.6 kPa, P\textsubscript{2}= 4.3 kPa. The volumes are V\textsubscript{1}= 2.9m\textsuperscript{3} and V\textsubscript{4}= 5.8m\textsuperscript{3}. What is the temperature at step 4?
\begin{choices} %%%%%%% begin choices
\choice 8.59 x 10\textsuperscript{0} K
\choice 2.71 x 10\textsuperscript{1} K
\choice 8.59 x 10\textsuperscript{1} K
\choice 2.71 x 10\textsuperscript{2} K
\CorrectChoice 8.59 x 10\textsuperscript{2} K
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 2.5 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 2.2 kPa, P\textsubscript{2}= 3.8 kPa. The volumes are V\textsubscript{1}= 2.9m\textsuperscript{3} and V\textsubscript{4}= 5.4m\textsuperscript{3}. What is the temperature at step 4?
\begin{choices} %%%%%%% begin choices
\choice 5.71 x 10\textsuperscript{0} K
\choice 1.81 x 10\textsuperscript{1} K
\choice 5.71 x 10\textsuperscript{1} K
\choice 1.81 x 10\textsuperscript{2} K
\CorrectChoice 5.71 x 10\textsuperscript{2} K
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 1.5 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 2.6 kPa, P\textsubscript{2}= 5.7 kPa. The volumes are V\textsubscript{1}= 2.7m\textsuperscript{3} and V\textsubscript{4}= 5.5m\textsuperscript{3}. What is the temperature at step 4?
\begin{choices} %%%%%%% begin choices
\CorrectChoice 1.15 x 10\textsuperscript{3} K
\choice 3.63 x 10\textsuperscript{3} K
\choice 1.15 x 10\textsuperscript{4} K
\choice 3.63 x 10\textsuperscript{4} K
\choice 1.15 x 10\textsuperscript{5} K
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 1.6 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 1.5 kPa, P\textsubscript{2}= 3 kPa. The volumes are V\textsubscript{1}= 2.4m\textsuperscript{3} and V\textsubscript{4}= 4.5m\textsuperscript{3}. What is the temperature at step 4?
\begin{choices} %%%%%%% begin choices
\choice 1.6 x 10\textsuperscript{1} K
\choice 5.07 x 10\textsuperscript{1} K
\choice 1.6 x 10\textsuperscript{2} K
\CorrectChoice 5.07 x 10\textsuperscript{2} K
\choice 1.6 x 10\textsuperscript{3} K
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 2 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 2.6 kPa, P\textsubscript{2}= 4.9 kPa. The volumes are V\textsubscript{1}= 1.2m\textsuperscript{3} and V\textsubscript{4}= 3.5m\textsuperscript{3}. What is the temperature at step 4?
\begin{choices} %%%%%%% begin choices
\choice 5.47 x 10\textsuperscript{1} K
\choice 1.73 x 10\textsuperscript{2} K
\CorrectChoice 5.47 x 10\textsuperscript{2} K
\choice 1.73 x 10\textsuperscript{3} K
\choice 5.47 x 10\textsuperscript{3} K
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 1.9 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 2.9 kPa, P\textsubscript{2}= 4.7 kPa. The volumes are V\textsubscript{1}= 2.7m\textsuperscript{3} and V\textsubscript{4}= 5.6m\textsuperscript{3}. What is the temperature at step 4?
\begin{choices} %%%%%%% begin choices
\choice 1.03 x 10\textsuperscript{1} K
\choice 3.25 x 10\textsuperscript{1} K
\choice 1.03 x 10\textsuperscript{2} K
\choice 3.25 x 10\textsuperscript{2} K
\CorrectChoice 1.03 x 10\textsuperscript{3} K
\end{choices} %%% end choices
\question
\includegraphics[width=0.15\textwidth]{Thermodynamic_cycles_for_quizzes.png} A 1241 heat cycle uses 1.4 moles of an ideal gas. The pressures and volumes are: P\textsubscript{1}= 1.4 kPa, P\textsubscript{2}= 4.1 kPa. The volumes are V\textsubscript{1}= 2.1m\textsuperscript{3} and V\textsubscript{4}= 4.7m\textsuperscript{3}. What is the temperature at step 4?
\begin{choices} %%%%%%% begin choices
\choice 1.79 x 10\textsuperscript{2} K
\CorrectChoice 5.65 x 10\textsuperscript{2} K
\choice 1.79 x 10\textsuperscript{3} K
\choice 5.65 x 10\textsuperscript{3} K
\choice 1.79 x 10\textsuperscript{4} K
\end{choices} %%% end choices
\end{questions}\pagebreak
\section{Attribution}
\theendnotes
\end{document}