MakerBot/curling pla
< MakerBot
Target Audience
[edit | edit source]Someone who is trying to print on makerbot, the pieces are curving up and hitting the print head.
Replication Goal
[edit | edit source]- Print without curling video
MakerBot Communication
[edit | edit source]Support request #103262 states:
- .. orange PLA should behave the same way clear and green PLA ...
- .. cover build plate in blue painters tape ..
Solution
[edit | edit source]Print at lower resolution, print at 235, print smaller, some pieces will still curl, hard to scrape off, but can get the 2D cutouts to print.