Power Supply Testing/Testing if the power supply does not work
Jump to navigation
Jump to search
Testing if the power supply is not working
[edit | edit source]- 1. Get the power cord
power cord - 2. Connect the power cord to the power supply
connecting the power cord to the power supply - 3. Get the multimeter
get the multimeter - 4. Turn the multimeter on to 20
turning the multimeter to 20 - 5. Place the black cord of the multimeter in the G binding post
- 6. Place the red cord in the 3.3 volt (if the voltage is not 3.3 it is not working)
the voltage of 3.3
- This power supply does not because the voltage of 3.3 is 0