CDIO/Rob-Motor
< CDIO
Problem Statement[edit | edit source]
- Learning how to do solder and follow step point.
- To build a rob-motor car, what materials can be used?
- To write code programs, what programs can be used?
Designing the Perform Process[edit | edit source]
Work flow[edit | edit source]
Experiment prototypes and tests need for design[edit | edit source]
- Steps: Solder a rob-motor board
-
Those parts are for rob-motor board system. -
Starting to solder the items on board of rob-motor. -
Still soldering. -
Finally complete with solder the rob-motor.
- Steps: install parts of rob-motors.
-
Those items are for motor, batter, wheels, and wires for rob-motor. -
Putting those parts together on the rob-motor. -
content the wires of wheels to board of rob-motor. -
This rob-motor is ready to run it.
- Steps: programs the rob-motors.
-
Programming Sheet. -
Example of command on the Programming Sheet before start to write codes in rob-motor. -
After install a code programs for rob-motor.
Possible implementation process improvements[edit | edit source]
- Need to know programs code for whole equipment to run it.
Next Steps[edit | edit source]
Have a fun!
-
Watch running of rob-motor.