CDIO/Rube Goldberg 6
< CDIO
Problem Statement[edit | edit source]
combine all parts together, test them and hand project off to new team.
testing the parts[edit | edit source]
we put all three parts together and tested to see if each one could set off the next. here is the link to testing. http://www.youtube.com/watch?v=fpcKGso3ZAs&feature=youtu.be testing showed that part one will successfully set off part two and that the accuracy of where the ball lands is very good. it also showed that part 2 has enough force to set off part 3
Next Steps[edit | edit source]
- mount all the parts on one board
- test and measure to determine where each part should be in relation to one another
- design a part to activate part 1
- build a part to activate part 1
- design a part to be activated from part 3
- build a part to be activated from part 3