Commons is a freely licensed media file repository. You can help.
Summary
DescriptionFinal product of the chopstick rubber band gun.jpg
English: Attach the unburst bar at the top as shown and fasten it with rubber bands. Put the trigger in as shown as well and fasten with rubber bands making sure not to fasten it too much as this is the moving part of the gun and should be able to move without too much friction slowing it down. The muzzle piece is attached to the front as shown and also fastened to the rubber band gun with rubber bands. In order to make the trigger more springy use one or two rubber bands, let it slip into the front of the frames and then pull it back and wrap it around the trigger until it is fastened correctly. The trigger should be able to move back and forth properly with out any problem.
to share – to copy, distribute and transmit the work
to remix – to adapt the work
Under the following conditions:
attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.