# User:Guy vandegrift/Quizbank/Archive1/Calculus Physics I/T4study

## CalcPhys1T4_Study[edit]

If you are reading this as a Wikiversity page, proper pagebreaks should result if printed using your browser's print option. On Chrome, Explorer, and Firefox, this option is available in the upper right hand corner of your screen. But, pagebreaks do not render properly if you use "Printable version" on Wikiversity's Print/export option on the left-hand sidebar.

- This document contains either a study guide OR pairs of exams taken from the same exam bank
- If two exams have the same s-number, then v1 and v2 have the same questions, presented in different (random) order.
- Exams with different s-numbers have different questions and may not have the same difficulty.
- Click items in the table of contents and appropriate page should be reached. This feature should allow you to print only those pages that you need.

- At the end of this document
**Attribution**for the quizzes identifies where the questions were obtained**Study guide**links reading materials and/or relevant equations.

### CalcPhys1T4_Study-v1s1[edit]

1. A 9.2 cm diameter pipe can fill a 1.6 m^3 volume in 8.0 minutes. Before exiting the pipe, the diameter is reduced to 4.0 cm (with no loss of flow rate). What is the speed in the first (wider) pipe?

- ___a) 5.01E-1 m/s

- ___b) 6.08E-1 m/s

- ___c) 7.36E-1 m/s

- ___d) 8.92E-1 m/s

- ___e) 1.08E0 m/s

2. A 6.4 cm diameter pipe can fill a 1.6 m^3 volume in 4.0 minutes. Before exiting the pipe, the diameter is reduced to 4.8 cm (with no loss of flow rate). What is the pressure difference (in Pascals) between the two regions of the pipe?

- ___a) 4.64E3

- ___b) 5.62E3

- ___c) 6.81E3

- ___d) 8.25E3

- ___e) 9.99E3

3. A 9.2 cm diameter pipe can fill a 1.6 m^3 volume in 8.0 minutes. Before exiting the pipe, the diameter is reduced to 4.0 cm (with no loss of flow rate). If two fluid elements at the center of the pipe are separated by 34.0 mm when they are both in the wide pipe, and we neglect turbulence, what is the separation when both are in the narrow pipe?

- ___a) 1.23E2 mm

- ___b) 1.48E2 mm

- ___c) 1.80E2 mm

- ___d) 2.18E2 mm

- ___e) 2.64E2 mm

4. A large cylinder is filled with water so that the bottom is 5.7 m below the waterline. At the bottom is a small hole with a diameter of 5.7E-4 m. How fast is the water flowing at the hole? (Neglect viscous effects, turbulence, and also assume that the hole is so small that no significant motion occurs at the top of the cylinder.)

- ___a) 5.94E0 m/s

- ___b) 7.20E0 m/s

- ___c) 8.72E0 m/s

- ___d) 1.06E1 m/s

- ___e) 1.28E1 m/s

5. What is the root-mean-square of 9, -17, and -8?

- ___a) 1.203 x 10
^{1}

- ___b) 1.35 x 10
^{1}

- ___c) 1.514 x 10
^{1}

- ___d) 1.699 x 10
^{1}

- ___e) 1.906 x 10
^{1}

6. What is the rms speed of a molecule with an atomic mass of 14 if the temperature is 22 degrees Fahrenheit?

- ___a) 6.9 x 10
^{2}m/s

- ___b) 8.37 x 10
^{2}m/s

- ___c) 1.01 x 10
^{3}m/s

- ___d) 1.23 x 10
^{3}m/s

- ___e) 1.49 x 10
^{3}m/s

7. If a molecule with atomic mass equal to 7 amu has a speed of 253 m/s, what is the speed at an atom in the same atmosphere of a molecule with an atomic mass of 26 ?

- ___a) 1.31 x 10
^{2}m/s

- ___b) 1.59 x 10
^{2}m/s

- ___c) 1.93 x 10
^{2}m/s

- ___d) 2.33 x 10
^{2}m/s

- ___e) 2.83 x 10
^{2}m/s

8. The specific heat of water and aluminum are 4186 and 900, respectively, where the units are J/kg/Celsius. An aluminum container of mass 0.68 kg is filled with 0.17 kg of water. How much heat does it take to raise both from 47.8 C to 83.2 C?

- ___a) 3.37 x 10
^{4}J

- ___b) 3.98 x 10
^{4}J

- ___c) 4.69 x 10
^{4}J

- ___d) 5.52 x 10
^{4}J

- ___e) 6.51 x 10
^{4}J

9. {The specific heat of water and aluminum are 4186 and 900, respectively, where the units are J/kg/Celsius. An aluminum container of mass 0.68 kg is filled with 0.17 kg of water. What fraction of the heat went into the aluminum?

- ___a) 2.8 x 10
^{-1}

- ___b) 3.3 x 10
^{-1}

- ___c) 3.9 x 10
^{-1}

- ___d) 4.6 x 10
^{-1}

- ___e) 5.5 x 10
^{-1}

10. The specific heat of water and aluminum are 4186 and 900, respectively, where the units are J/kg/Celsius. An aluminum container of mass 0.66 kg is filled with 0.11 kg of water. You are consulting for the flat earth society, a group of people who believe that the acceleration of gravity equals 9.8 m/s/s at all altitudes. Based on this assumption, from what height must the water and container be dropped to achieve the same change in temperature? (For comparison, Earth's radius is 6,371 kilometers)

- ___a) 1.64 x 10
^{0}km

- ___b) 1.99 x 10
^{0}km

- ___c) 2.41 x 10
^{0}km

- ___d) 2.92 x 10
^{0}km

- ___e) 3.54 x 10
^{0}km

11. A window is square, with a length of each side equal to 0.78 meters. The glass has a thickness of 11 mm. To decrease the heat loss, you reduce the size of the window by decreasing the length of each side by a factor of 1.31. You also increase the thickness of the glass by a factor of 2.97. If the inside and outside temperatures are unchanged, by what factor have you decreased the heat flow?. By what factor have you decreased the heat flow (assuming the same inside and outside temperatures).

- ___a) 2.37 x 10
^{0}unit

- ___b) 2.87 x 10
^{0}unit

- ___c) 3.47 x 10
^{0}unit

- ___d) 4.21 x 10
^{0}unit

- ___e) 5.1 x 10
^{0}unit

_{1}= 2.8 kPa, P

_{2}= 5.6 kPa. The volumes are V

_{1}= 2.1m

^{3}and V

_{4}= 4.8m

^{3}. How much work is done in in one cycle?

- ___a) 3.78 x 10
^{2}J

- ___b) 1.2 x 10
^{3}J

- ___c) 3.78 x 10
^{3}J

- ___d) 1.2 x 10
^{4}J

- ___e) 3.78 x 10
^{4}J

_{1}= 1.6 kPa, P

_{2}= 4.3 kPa. The volumes are V

_{1}= 1.6m

^{3}and V

_{4}= 3.2m

^{3}. How much work is involved between 1 and 4?

- ___a) 2.56 x 10
^{3}J

- ___b) 8.1 x 10
^{3}J

- ___c) 2.56 x 10
^{4}J

- ___d) 8.1 x 10
^{4}J

- ___e) 2.56 x 10
^{5}J

_{1}= 3 kPa, P

_{2}= 5.4 kPa. The volumes are V

_{1}= 2.6m

^{3}and V

_{4}= 5m

^{3}. How much work is involved between 2 and 4?

- ___a) 1.01 x 10
^{2}J

- ___b) 3.19 x 10
^{2}J

- ___c) 1.01 x 10
^{3}J

- ___d) 3.19 x 10
^{3}J

- ___e) 1.01 x 10
^{4}J

_{1}= 2.6 kPa, P

_{2}= 5.7 kPa. The volumes are V

_{1}= 2.7m

^{3}and V

_{4}= 5.5m

^{3}. What is the temperature at step 4?

- ___a) 1.15 x 10
^{3}K

- ___b) 3.63 x 10
^{3}K

- ___c) 1.15 x 10
^{4}K

- ___d) 3.63 x 10
^{4}K

- ___e) 1.15 x 10
^{5}K

16. These two pulses will collide and produce

- ___ a) positive diffraction

- ___ b) positive interference

- ___ c) negative interference

- ___ d) negative diffraction

17. These two pulses will collide and produce

- ___ a) positive interference

- ___ b) negative interference

- ___ c) positive diffraction

- ___ d) negative diffraction

18. These two pulses will collide and produce

- ___ a) positive interference

- ___ b) positive diffraction

- ___ c) negative interference

- ___ d) negative diffraction

22. Why don't we hear beats when two different notes on a piano are played at the same time?

- ___ a) The beats happen so many times per second you can't hear them.

- ___ b) Echo usually stifles the beats

- ___ c) The note is over by the time the first beat is heard

- ___ d) Reverberation usually stifles the beats

23. A tuning fork with a frequency of 440 Hz is played simultaneously with a tuning fork of 442 Hz. How many beats are heard in 10 seconds?

- ___ a) 20

- ___ b) 50

- ___ c) 30

- ___ d) 40

- ___ e) 60

24. If you start moving towards a source of sound, the pitch becomes

- ___ a) unchanged

- ___ b) lower

- ___ c) higher

25. If a source of sound is moving towards you, the pitch becomes

- ___ a) higher

- ___ b) lower

- ___ c) unchanged

26. Why do rough walls give a concert hall a “fuller” sound, compared to smooth walls?

- ___ a) Rough walls make for a louder sound.

- ___ b) The difference in path lengths creates more echo.

- ___ c) The difference in path lengths creates more reverberation.

27. People don't usually perceive an echo when

- ___ a) it arrives at a lower pitch

- ___ b) it arrives at exactly the same pitch

- ___ c) it takes more than a tenth of a second after the original sound to arrive

- ___ d) it arrives less than a tenth of a second after the original sound

- ___ e) it arrives at a higher pitch

28. A dense rope is connected to a rope with less density (i.e. fewer kilograms per meter). If the rope is stretched and a wave is sent along high density rope,

- ___ a) the low density rope supports a wave with a lower frequency

- ___ b) the low density rope supports a wave with a lower speed

- ___ c) the low density rope supports a wave with a higher speed

- ___ d) the low density rope supports a wave with a higher frequency

29. What happens to the wavelength on a wave on a stretched string if the wave passes from lightweight (low density) region of the rope to a heavy (high density) rope?

- ___ a) the wavelength gets shorter

- ___ b) the wavelength gets longer

- ___ c) the wavelength stays the same

30. When a wave is reflected off a stationary barrier, the reflected wave

- ___ a) has higher frequency than the incident wave

- ___ b) both of these are true

- ___ c) has lower amplitude than the incident wave

31. Comparing a typical church to a professional baseball stadium, the church is likely to have

- ___ a) both reverberation and echo

- ___ b) reverberation instead of echo

- ___ c) echo instead of reverberation

- ___ d) neither reverberation nor echo

32. A 0.111 kg mass is on a spring that causes the frequency of oscillation to be 63 cycles per second. The maximum velocity is 20.3 m/s. What is the maximum force on the mass?

- ___a) 1.9 x 10
^{2}N

- ___b) 4.1 x 10
^{2}N

- ___c) 8.9 x 10
^{2}N

- ___d) 1.9 x 10
^{3}N

- ___e) 4.1 x 10
^{3}N

33. A spring with spring constant 9.6 kN/m is attached to a 9.1 gram mass. The maximum acelleration is 1.6 m/s^{2}. What is the maximum displacement?

- ___a) 4.8 x 10
^{-7}m

- ___b) 1.52 x 10
^{-6}m

- ___c) 4.8 x 10
^{-6}m

- ___d) 1.52 x 10
^{-5}m

- ___e) 4.8 x 10
^{-5}m

34. A spring of spring constant 6.9 kN/m causes a mass to move with a period of 8.6 ms. The maximum displacement is 2.3 mm. What is the maximum kinetic energy?

- ___a) 5.77 x 10
^{-3}J

- ___b) 1.83 x 10
^{-2}J

- ___c) 5.77 x 10
^{-2}J

- ___d) 1.83 x 10
^{-1}J

- ___e) 5.77 x 10
^{-1}J

35. A spring with spring constant 7.7 kN/m undergoes simple harmonic motion with a frequency of 4.4 kHz. The maximum force is 9.4 N. What is the total energy?

- ___a) 5.74 x 10
^{-5}J

- ___b) 1.81 x 10
^{-4}J

- ___c) 5.74 x 10
^{-4}J

- ___d) 1.81 x 10
^{-3}J

- ___e) 5.74 x 10
^{-3}J

36. If a particle's position is given by *x(t) = 7sin(3t-π/6)*, what is the velocity?

- ___ a)
*v(t) = 21sin(3t-π/6)*

- ___ b)
*v(t) = 7cos(3t-π/6)*

- ___ c)
*v(t) = -21sin(3t-π/6)*

- ___ d)
*v(t) = 21cos(3t-π/6)*

- ___ e)
*v(t) = -21cos(3t-π/6)*

37. If a particle's position is given by *x(t) = 7sin(3t-π/6)*, what is the acceleration?

- ___ a)
*a(t) = -21sin(3t-π/6)*

- ___ b)
*a(t) = +63sin(3t-π/6)*

- ___ c)
*a(t) = -63sin(3t-π/6)*

- ___ d)
*a(t) = +21sin(3t-π/6)*

- ___ e)
*a(t) = -21cos(3t-π/6)*

38. If a particle's position is given by *x(t) = 5cos(4t-π/6)*, what is the velocity?

- ___ a)
*v(t) = -20sin(4t-π/6)*

- ___ b)
*v(t) = 20sin(4t-π/6)*

- ___ c)
*v(t) = 5sin(4t-π/6)*

- ___ d)
*v(t) = -20cos(4t-π/6)*

- ___ e)
*v(t) = 20cos(4t-π/6)*

39. If a particle's position is given by *x(t) = 5sin(4t-π/6)*, what is the velocity?

- ___ a)
*v(t) = 20cos(4t-π/6)*

- ___ b)
*v(t) = -20cos(4t-π/6)*

- ___ c)
*v(t) = 5cos(4t-π/6)*

- ___ d)
*v(t) = -20sin(4t-π/6)*

- ___ e)
*v(t) = 20sin(4t-π/6)*

40. If a particle's position is given by *x(t) = 7cos(3t-π/6)*, what is the velocity?

- ___ a)
*v(t) = 21cos(3t-π/6)*

- ___ b)
*v(t) = -21cos(3t-π/6)*

- ___ c)
*v(t) = 21sin(3t-π/6)*

- ___ d)
*v(t) = -21sin(3t-π/6)*

- ___ e)
*v(t) = 7sin(3t-π/6)*

41. If a particle's position is given by *x(t) = 5sin(4t-π/6)*, what is the acceleration?

- ___ a)
*a(t) = +20sin(4t-π/6)*

- ___ b)
*a(t) = +80sin(4t-π/6)*

- ___ c)
*a(t) = -100sin(4t-π/6)*

- ___ d)
*a(t) = -100cos(4t-π/6)*

- ___ e)
*a(t) = -80sin(4t-π/6)*

#### Key to CalcPhys1T4_Study-v1s1[edit]

1. A 9.2 cm diameter pipe can fill a 1.6 m^3 volume in 8.0 minutes. Before exiting the pipe, the diameter is reduced to 4.0 cm (with no loss of flow rate). What is the speed in the first (wider) pipe?

- +a) 5.01E-1 m/s

- -b) 6.08E-1 m/s

- -c) 7.36E-1 m/s

- -d) 8.92E-1 m/s

- -e) 1.08E0 m/s

2. A 6.4 cm diameter pipe can fill a 1.6 m^3 volume in 4.0 minutes. Before exiting the pipe, the diameter is reduced to 4.8 cm (with no loss of flow rate). What is the pressure difference (in Pascals) between the two regions of the pipe?

- +a) 4.64E3

- -b) 5.62E3

- -c) 6.81E3

- -d) 8.25E3

- -e) 9.99E3

3. A 9.2 cm diameter pipe can fill a 1.6 m^3 volume in 8.0 minutes. Before exiting the pipe, the diameter is reduced to 4.0 cm (with no loss of flow rate). If two fluid elements at the center of the pipe are separated by 34.0 mm when they are both in the wide pipe, and we neglect turbulence, what is the separation when both are in the narrow pipe?

- -a) 1.23E2 mm

- -b) 1.48E2 mm

- +c) 1.80E2 mm

- -d) 2.18E2 mm

- -e) 2.64E2 mm

4. A large cylinder is filled with water so that the bottom is 5.7 m below the waterline. At the bottom is a small hole with a diameter of 5.7E-4 m. How fast is the water flowing at the hole? (Neglect viscous effects, turbulence, and also assume that the hole is so small that no significant motion occurs at the top of the cylinder.)

- -a) 5.94E0 m/s

- -b) 7.20E0 m/s

- -c) 8.72E0 m/s

- +d) 1.06E1 m/s

- -e) 1.28E1 m/s

5. What is the root-mean-square of 9, -17, and -8?

- +a) 1.203 x 10
^{1}

- +a) 1.203 x 10

- -b) 1.35 x 10
^{1}

- -b) 1.35 x 10

- -c) 1.514 x 10
^{1}

- -c) 1.514 x 10

- -d) 1.699 x 10
^{1}

- -d) 1.699 x 10

- -e) 1.906 x 10
^{1}

- -e) 1.906 x 10

6. What is the rms speed of a molecule with an atomic mass of 14 if the temperature is 22 degrees Fahrenheit?

- +a) 6.9 x 10
^{2}m/s

- +a) 6.9 x 10

- -b) 8.37 x 10
^{2}m/s

- -b) 8.37 x 10

- -c) 1.01 x 10
^{3}m/s

- -c) 1.01 x 10

- -d) 1.23 x 10
^{3}m/s

- -d) 1.23 x 10

- -e) 1.49 x 10
^{3}m/s

- -e) 1.49 x 10

7. If a molecule with atomic mass equal to 7 amu has a speed of 253 m/s, what is the speed at an atom in the same atmosphere of a molecule with an atomic mass of 26 ?

- +a) 1.31 x 10
^{2}m/s

- +a) 1.31 x 10

- -b) 1.59 x 10
^{2}m/s

- -b) 1.59 x 10

- -c) 1.93 x 10
^{2}m/s

- -c) 1.93 x 10

- -d) 2.33 x 10
^{2}m/s

- -d) 2.33 x 10

- -e) 2.83 x 10
^{2}m/s

- -e) 2.83 x 10

8. The specific heat of water and aluminum are 4186 and 900, respectively, where the units are J/kg/Celsius. An aluminum container of mass 0.68 kg is filled with 0.17 kg of water. How much heat does it take to raise both from 47.8 C to 83.2 C?

- -a) 3.37 x 10
^{4}J

- -a) 3.37 x 10

- -b) 3.98 x 10
^{4}J

- -b) 3.98 x 10

- +c) 4.69 x 10
^{4}J

- +c) 4.69 x 10

- -d) 5.52 x 10
^{4}J

- -d) 5.52 x 10

- -e) 6.51 x 10
^{4}J

- -e) 6.51 x 10

9. {The specific heat of water and aluminum are 4186 and 900, respectively, where the units are J/kg/Celsius. An aluminum container of mass 0.68 kg is filled with 0.17 kg of water. What fraction of the heat went into the aluminum?

- -a) 2.8 x 10
^{-1}

- -a) 2.8 x 10

- -b) 3.3 x 10
^{-1}

- -b) 3.3 x 10

- -c) 3.9 x 10
^{-1}

- -c) 3.9 x 10

- +d) 4.6 x 10
^{-1}

- +d) 4.6 x 10

- -e) 5.5 x 10
^{-1}

- -e) 5.5 x 10

10. The specific heat of water and aluminum are 4186 and 900, respectively, where the units are J/kg/Celsius. An aluminum container of mass 0.66 kg is filled with 0.11 kg of water. You are consulting for the flat earth society, a group of people who believe that the acceleration of gravity equals 9.8 m/s/s at all altitudes. Based on this assumption, from what height must the water and container be dropped to achieve the same change in temperature? (For comparison, Earth's radius is 6,371 kilometers)

- -a) 1.64 x 10
^{0}km

- -a) 1.64 x 10

- -b) 1.99 x 10
^{0}km

- -b) 1.99 x 10

- -c) 2.41 x 10
^{0}km

- -c) 2.41 x 10

- +d) 2.92 x 10
^{0}km

- +d) 2.92 x 10

- -e) 3.54 x 10
^{0}km

- -e) 3.54 x 10

11. A window is square, with a length of each side equal to 0.78 meters. The glass has a thickness of 11 mm. To decrease the heat loss, you reduce the size of the window by decreasing the length of each side by a factor of 1.31. You also increase the thickness of the glass by a factor of 2.97. If the inside and outside temperatures are unchanged, by what factor have you decreased the heat flow?. By what factor have you decreased the heat flow (assuming the same inside and outside temperatures).

- -a) 2.37 x 10
^{0}unit

- -a) 2.37 x 10

- -b) 2.87 x 10
^{0}unit

- -b) 2.87 x 10

- -c) 3.47 x 10
^{0}unit

- -c) 3.47 x 10

- -d) 4.21 x 10
^{0}unit

- -d) 4.21 x 10

- +e) 5.1 x 10
^{0}unit

- +e) 5.1 x 10

_{1}= 2.8 kPa, P

_{2}= 5.6 kPa. The volumes are V

_{1}= 2.1m

^{3}and V

_{4}= 4.8m

^{3}. How much work is done in in one cycle?

- -a) 3.78 x 10
^{2}J

- -a) 3.78 x 10

- -b) 1.2 x 10
^{3}J

- -b) 1.2 x 10

- +c) 3.78 x 10
^{3}J

- +c) 3.78 x 10

- -d) 1.2 x 10
^{4}J

- -d) 1.2 x 10

- -e) 3.78 x 10
^{4}J

- -e) 3.78 x 10

_{1}= 1.6 kPa, P

_{2}= 4.3 kPa. The volumes are V

_{1}= 1.6m

^{3}and V

_{4}= 3.2m

^{3}. How much work is involved between 1 and 4?

- +a) 2.56 x 10
^{3}J

- +a) 2.56 x 10

- -b) 8.1 x 10
^{3}J

- -b) 8.1 x 10

- -c) 2.56 x 10
^{4}J

- -c) 2.56 x 10

- -d) 8.1 x 10
^{4}J

- -d) 8.1 x 10

- -e) 2.56 x 10
^{5}J

- -e) 2.56 x 10

_{1}= 3 kPa, P

_{2}= 5.4 kPa. The volumes are V

_{1}= 2.6m

^{3}and V

_{4}= 5m

^{3}. How much work is involved between 2 and 4?

- -a) 1.01 x 10
^{2}J

- -a) 1.01 x 10

- -b) 3.19 x 10
^{2}J

- -b) 3.19 x 10

- -c) 1.01 x 10
^{3}J

- -c) 1.01 x 10

- -d) 3.19 x 10
^{3}J

- -d) 3.19 x 10

- +e) 1.01 x 10
^{4}J

- +e) 1.01 x 10

_{1}= 2.6 kPa, P

_{2}= 5.7 kPa. The volumes are V

_{1}= 2.7m

^{3}and V

_{4}= 5.5m

^{3}. What is the temperature at step 4?

- +a) 1.15 x 10
^{3}K

- +a) 1.15 x 10

- -b) 3.63 x 10
^{3}K

- -b) 3.63 x 10

- -c) 1.15 x 10
^{4}K

- -c) 1.15 x 10

- -d) 3.63 x 10
^{4}K

- -d) 3.63 x 10

- -e) 1.15 x 10
^{5}K

- -e) 1.15 x 10

16. These two pulses will collide and produce

- - a) positive diffraction

- + b) positive interference

- - c) negative interference

- - d) negative diffraction

17. These two pulses will collide and produce

- - a) positive interference

- + b) negative interference

- - c) positive diffraction

- - d) negative diffraction

18. These two pulses will collide and produce

- + a) positive interference

- - b) positive diffraction

- - c) negative interference

- - d) negative diffraction

22. Why don't we hear beats when two different notes on a piano are played at the same time?

- + a) The beats happen so many times per second you can't hear them.

- - b) Echo usually stifles the beats

- - c) The note is over by the time the first beat is heard

- - d) Reverberation usually stifles the beats

23. A tuning fork with a frequency of 440 Hz is played simultaneously with a tuning fork of 442 Hz. How many beats are heard in 10 seconds?

- + a) 20

- - b) 50

- - c) 30

- - d) 40

- - e) 60

24. If you start moving towards a source of sound, the pitch becomes

- - a) unchanged

- - b) lower

- + c) higher

25. If a source of sound is moving towards you, the pitch becomes

- + a) higher

- - b) lower

- - c) unchanged

26. Why do rough walls give a concert hall a “fuller” sound, compared to smooth walls?

- - a) Rough walls make for a louder sound.

- - b) The difference in path lengths creates more echo.

- + c) The difference in path lengths creates more reverberation.

27. People don't usually perceive an echo when

- - a) it arrives at a lower pitch

- - b) it arrives at exactly the same pitch

- - c) it takes more than a tenth of a second after the original sound to arrive

- + d) it arrives less than a tenth of a second after the original sound

- - e) it arrives at a higher pitch

28. A dense rope is connected to a rope with less density (i.e. fewer kilograms per meter). If the rope is stretched and a wave is sent along high density rope,

- - a) the low density rope supports a wave with a lower frequency

- - b) the low density rope supports a wave with a lower speed

- + c) the low density rope supports a wave with a higher speed

- - d) the low density rope supports a wave with a higher frequency

29. What happens to the wavelength on a wave on a stretched string if the wave passes from lightweight (low density) region of the rope to a heavy (high density) rope?

- - a) the wavelength gets shorter

- + b) the wavelength gets longer

- - c) the wavelength stays the same

30. When a wave is reflected off a stationary barrier, the reflected wave

- - a) has higher frequency than the incident wave

- - b) both of these are true

- + c) has lower amplitude than the incident wave

31. Comparing a typical church to a professional baseball stadium, the church is likely to have

- - a) both reverberation and echo

- + b) reverberation instead of echo

- - c) echo instead of reverberation

- - d) neither reverberation nor echo

32. A 0.111 kg mass is on a spring that causes the frequency of oscillation to be 63 cycles per second. The maximum velocity is 20.3 m/s. What is the maximum force on the mass?

- -a) 1.9 x 10
^{2}N

- -a) 1.9 x 10

- -b) 4.1 x 10
^{2}N

- -b) 4.1 x 10

- +c) 8.9 x 10
^{2}N

- +c) 8.9 x 10

- -d) 1.9 x 10
^{3}N

- -d) 1.9 x 10

- -e) 4.1 x 10
^{3}N

- -e) 4.1 x 10

33. A spring with spring constant 9.6 kN/m is attached to a 9.1 gram mass. The maximum acelleration is 1.6 m/s^{2}. What is the maximum displacement?

- -a) 4.8 x 10
^{-7}m

- -a) 4.8 x 10

- +b) 1.52 x 10
^{-6}m

- +b) 1.52 x 10

- -c) 4.8 x 10
^{-6}m

- -c) 4.8 x 10

- -d) 1.52 x 10
^{-5}m

- -d) 1.52 x 10

- -e) 4.8 x 10
^{-5}m

- -e) 4.8 x 10

34. A spring of spring constant 6.9 kN/m causes a mass to move with a period of 8.6 ms. The maximum displacement is 2.3 mm. What is the maximum kinetic energy?

- -a) 5.77 x 10
^{-3}J

- -a) 5.77 x 10

- +b) 1.83 x 10
^{-2}J

- +b) 1.83 x 10

- -c) 5.77 x 10
^{-2}J

- -c) 5.77 x 10

- -d) 1.83 x 10
^{-1}J

- -d) 1.83 x 10

- -e) 5.77 x 10
^{-1}J

- -e) 5.77 x 10

35. A spring with spring constant 7.7 kN/m undergoes simple harmonic motion with a frequency of 4.4 kHz. The maximum force is 9.4 N. What is the total energy?

- -a) 5.74 x 10
^{-5}J

- -a) 5.74 x 10

- -b) 1.81 x 10
^{-4}J

- -b) 1.81 x 10

- -c) 5.74 x 10
^{-4}J

- -c) 5.74 x 10

- -d) 1.81 x 10
^{-3}J

- -d) 1.81 x 10

- +e) 5.74 x 10
^{-3}J

- +e) 5.74 x 10

36. If a particle's position is given by *x(t) = 7sin(3t-π/6)*, what is the velocity?

- - a)
*v(t) = 21sin(3t-π/6)*

- - a)

- - b)
*v(t) = 7cos(3t-π/6)*

- - b)

- - c)
*v(t) = -21sin(3t-π/6)*

- - c)

- + d)
*v(t) = 21cos(3t-π/6)*

- + d)

- - e)
*v(t) = -21cos(3t-π/6)*

- - e)

37. If a particle's position is given by *x(t) = 7sin(3t-π/6)*, what is the acceleration?

- - a)
*a(t) = -21sin(3t-π/6)*

- - a)

- - b)
*a(t) = +63sin(3t-π/6)*

- - b)

- + c)
*a(t) = -63sin(3t-π/6)*

- + c)

- - d)
*a(t) = +21sin(3t-π/6)*

- - d)

- - e)
*a(t) = -21cos(3t-π/6)*

- - e)

38. If a particle's position is given by *x(t) = 5cos(4t-π/6)*, what is the velocity?

- + a)
*v(t) = -20sin(4t-π/6)*

- + a)

- - b)
*v(t) = 20sin(4t-π/6)*

- - b)

- - c)
*v(t) = 5sin(4t-π/6)*

- - c)

- - d)
*v(t) = -20cos(4t-π/6)*

- - d)

- - e)
*v(t) = 20cos(4t-π/6)*

- - e)

39. If a particle's position is given by *x(t) = 5sin(4t-π/6)*, what is the velocity?

- + a)
*v(t) = 20cos(4t-π/6)*

- + a)

- - b)
*v(t) = -20cos(4t-π/6)*

- - b)

- - c)
*v(t) = 5cos(4t-π/6)*

- - c)

- - d)
*v(t) = -20sin(4t-π/6)*

- - d)

- - e)
*v(t) = 20sin(4t-π/6)*

- - e)

40. If a particle's position is given by *x(t) = 7cos(3t-π/6)*, what is the velocity?

- - a)
*v(t) = 21cos(3t-π/6)*

- - a)

- - b)
*v(t) = -21cos(3t-π/6)*

- - b)

- - c)
*v(t) = 21sin(3t-π/6)*

- - c)

- + d)
*v(t) = -21sin(3t-π/6)*

- + d)

- - e)
*v(t) = 7sin(3t-π/6)*

- - e)

41. If a particle's position is given by *x(t) = 5sin(4t-π/6)*, what is the acceleration?

- - a)
*a(t) = +20sin(4t-π/6)*

- - a)

- - b)
*a(t) = +80sin(4t-π/6)*

- - b)

- - c)
*a(t) = -100sin(4t-π/6)*

- - c)

- - d)
*a(t) = -100cos(4t-π/6)*

- - d)

- + e)
*a(t) = -80sin(4t-π/6)*

- + e)

- Attribution (for quiz questions) under CC-by-SA license

- http://en.wikiversity.org/w/index.php?title=Physics_equations/18-Electric_charge_and_field/Q:findE&oldid=1378605
- http://en.wikiversity.org/wiki/How_things_work_college_course/Waves_(Physics_Classroom)
- https://en.wikiversity.org/wiki/Physics_equations/16-Oscillatory_Motion_and_Waves/Q:CALCULUS
- Study guide

- http://en.wikiversity.org/wiki/Physics_equations/Sheet/All_chapters
- http://www.physicsclassroom.com/class/waves
- https://en.wikiversity.org/wiki/Physics_equations