Plasma

From Wikiversity
Jump to: navigation, search
Smiley green alien cry.svg Completion status: this resource is a stub, which means that pretty much nothing has been done yet.
Document spider web.svg This resource is currently unmaintained. Please feel welcome to adopt it and then change this tag.
Nuvola apps edu miscellaneous.svg Resource type: this resource is a lesson.
Nuvola apps edu science.svg Subject classification: this is a chemistry resource .
Logo physics.svg Subject classification: this is a physics resource .
Nuvola apps kalzium.svg Subject classification: this is a science resource .

In physics and chemistry, plasma is a state of matter similar to gas in which a certain portion of the particles are ionized. The basic premise is that heating a gas dissociates its molecular bonds, rendering it into its constituent atoms. Further heating leads to ionization (a loss of electrons), turning it into a plasma: containing charged particles, positive ions and negative electrons.[1] The presence of a non-negligible number of charge carriers makes the plasma electrically conductive so that it responds strongly to electromagnetic fields. Plasma, therefore, has properties quite unlike those of solids, liquids, or gases and is considered to be a distinct state of matter. Like gas, plasma does not have a definite shape or a definite volume unless enclosed in a container; unlike gas, under the influence of a magnetic field, it may form structures such as filaments, beams and double layers. Some common plasmas are stars and neon signs. Plasma was first identified in a Crookes tube, and so described by Sir William Crookes in 1879 (he called it "radiant matter").[2] The nature of the Crookes tube "cathode ray" matter was subsequently identified by British physicist Sir J.J. Thomson in 1897,[3] and dubbed "plasma" by Irving Langmuir in 1928,[4] perhaps because it reminded him of a blood plasma. Langmuir wrote: Except near the electrodes, where there are sheaths containing very few electrons, the ionized gas contains ions and electrons in about equal numbers so that the resultant space charge is very small. We shall use the name plasma to describe this region containing balanced charges of ions and electrons.[4] Contents [hide] 1 Common plasmas 2 Plasma properties and parameters 2.1 Definition of a plasma 2.2 Ranges of plasma parameters 2.3 Degree of ionization 2.4 Temperatures 2.5 Potentials 2.6 Magnetization 2.7 Comparison of plasma and gas phases 3 Complex plasma phenomena 3.1 Filamentation 3.2 Shocks or double layers 3.3 Electric fields and circuits 3.4 Cellular structure 3.5 Critical ionization velocity 3.6 Ultracold plasma 3.7 Non-neutral plasma 3.8 Dusty plasma and grain plasma 4 Mathematical descriptions 4.1 Fluid model 4.2 Kinetic model 5 Artificial plasmas 5.1 Generation of artificial plasma 5.2 Examples of industrial/commercial plasma 5.2.1 Low-pressure discharges 5.2.2 Atmospheric pressure 6 Fields of active research 7 See also 8 Notes 9 References 10 External links [edit]Common plasmas

Further information: Astrophysical plasma, Interstellar medium, and Intergalactic space Plasmas are by far the most common phase of matter in the universe, both by mass and by volume.[5] All the stars are made of plasma, and even the space between the stars is filled with a plasma, albeit a very sparse one. In our solar system, the planet Jupiter accounts for most of the non-plasma, only about 0.1% of the mass and 10−15% of the volume within the orbit of Pluto. Very small grains within a gaseous plasma will also pick up a net negative charge, so that they in turn may act like a very heavy negative ion component of the plasma (see dusty plasmas). Common forms of plasma Artificially produced Terrestrial plasmas Space and Astrophysical plasmas Those found in plasma displays, including TVs Inside fluorescent lamps (low energy lighting), neon signs[6] Rocket exhaust and ion thrusters The area in front of a spacecraft's heat shield during reentry into the atmosphere Inside a corona discharge ozone generator Fusion energy research The electric arc in an arc lamp, an arc welder or plasma torch Plasma ball (sometimes called a plasma sphere or plasma globe) Arcs produced by Tesla coils (resonant air core transformer or disruptor coil that produces arcs similar to lightning but with alternating current rather than static electricity) Plasmas used in semiconductor device fabrication including: Reactive Ion Etching, Sputtering, surface cleaning and Plasma Enhanced Chemical Vapor Deposition Laser-produced plasmas (LPP), found when high power lasers interact with materials. Inductively Coupled Plasmas (ICP), formed typically in argon gas for Optical Emission Spectroscopy or Mass Spectroscopy Magnetically Induced Plasmas (MIP), typically produced using microwaves as a resonant coupling method Lightning Ball lightning St. Elmo's fire Sprites, elves, jets The ionosphere The polar auroras Most flames The Sun and other stars (plasmas heated by nuclear fusion) The solar wind The interplanetary medium (space between planets) The interstellar medium (space between star systems) The Intergalactic medium (space between galaxies) The Io-Jupiter flux tube Accretion discs Interstellar nebulae [edit]Plasma properties and parameters


Artist's rendition of the Earth's "plasma fountain", showing oxygen, helium, and hydrogen ions which gush into space from regions near the Earth's poles. The faint yellow area shown above the north pole represents gas lost from Earth into space; the green area is the aurora borealis, where plasma energy pours back into the atmosphere.[7] [edit]Definition of a plasma Plasma is loosely described as an electrically neutral medium of positive and negative particles (i.e. the overall charge of a plasma is roughly zero). It is important to note that although they are unbound, these particles are not ‘free’. When the charges move they generate electrical currents with magnetic fields, and as a result, they are affected by each other’s fields. This governs their collective behavior with many degrees of freedom.[1][8] A definition can have three criteria:[9][10] The plasma approximation: Charged particles must be close enough together that each particle influences many nearby charged particles, rather than just interacting with the closest particle (these collective effects are a distinguishing feature of a plasma). The plasma approximation is valid when the number of charge carriers within the sphere of influence (called the Debye sphere whose radius is the Debye screening length) of a particular particle are higher than unity to provide collective behavior of the charged particles. The average number of particles in the Debye sphere is given by the plasma parameter, "Λ" (the Greek letter Lambda). Bulk interactions: The Debye screening length (defined above) is short compared to the physical size of the plasma. This criterion means that interactions in the bulk of the plasma are more important than those at its edges, where boundary effects may take place. When this criterion is satisfied, the plasma is quasineutral. Plasma frequency: The electron plasma frequency (measuring plasma oscillations of the electrons) is large compared to the electron-neutral collision frequency (measuring frequency of collisions between electrons and neutral particles). When this condition is valid, electrostatic interactions dominate over the processes of ordinary gas kinetics. [edit]Ranges of plasma parameters Plasma parameters can take on values varying by many orders of magnitude, but the properties of plasmas with apparently disparate parameters may be very similar (see plasma scaling). The following chart considers only conventional atomic plasmas and not exotic phenomena like quark gluon plasmas:


Range of plasmas. Density increases upwards, temperature increases towards the right. The free electrons in a metal may be considered an electron plasma.[11] Typical ranges of plasma parameters: orders of magnitude Characteristic Terrestrial plasmas Cosmic plasmas Size in meters 10−6 m (lab plasmas) to 102 m (lightning) (~8 OOM) 10−6 m (spacecraft sheath) to 1025 m (intergalactic nebula) (~31 OOM) Lifetime in seconds 10−12 s (laser-produced plasma) to 107 s (fluorescent lights) (~19 OOM) 101 s (solar flares) to 1017 s (intergalactic plasma) (~16 OOM) Density in particles per cubic meter 107 m−3 to 1032 m−3 (inertial confinement plasma) 1 m−3 (intergalactic medium) to 1030 m−3 (stellar core) Temperature in kelvins ~0 K (crystalline non-neutral plasma[12]) to 108 K (magnetic fusion plasma) 102 K (aurora) to 107 K (solar core) Magnetic fields in teslas 10−4 T (lab plasma) to 103 T (pulsed-power plasma) 10−12 T (intergalactic medium) to 1011 T (near neutron stars) [edit]Degree of ionization For plasma to exist, ionization is necessary. The term "plasma density" by itself usually refers to the "electron density", that is, the number of free electrons per unit volume. The degree of ionization of a plasma is the proportion of atoms which have lost (or gained) electrons, and is controlled mostly by the temperature. Even a partially ionized gas in which as little as 1% of the particles are ionized can have the characteristics of a plasma (i.e., response to magnetic fields and high electrical conductivity). The degree of ionization, α is defined as α = ni/(ni + na) where ni is the number density of ions and na is the number density of neutral atoms. The electron density is related to this by the average charge state <Z> of the ions through ne = <Z> ni where ne is the number density of electrons. [edit]Temperatures The kinetic energy of a plasma particle is considerably higher than its potential, where charged particles travel at high speeds. If the potential were greater than the kinetic, then the plasma state would be destroyed as the ions and electrons would want to clump together into bound states—atoms.[13] This is why plasmas typically arise at very high temperatures. Plasma temperature is commonly measured in kelvins or electronvolts and is an informal measure of the thermal kinetic energy per particle. In most cases the electrons are close enough to thermal equilibrium that their temperature is relatively well-defined, even when there is a significant deviation from a Maxwellian energy distribution function, for example, due to UV radiation, energetic particles, or strong electric fields. Because of the large difference in mass, the electrons come to thermodynamic equilibrium amongst themselves much faster than they come into equilibrium with the ions or neutral atoms. For this reason, the "ion temperature" may be very different from (usually lower than) the "electron temperature". This is especially common in weakly ionized technological plasmas, where the ions are often near the ambient temperature. Based on the relative temperatures of the electrons, ions and neutrals, plasmas are classified as "thermal" or "non-thermal". Thermal plasmas have electrons and the heavy particles at the same temperature, i.e., they are in thermal equilibrium with each other. Non-thermal plasmas on the other hand have the ions and neutrals at a much lower temperature, (normally room temperature), whereas electrons are much "hotter". Temperature controls the degree of plasma ionization. In particular, plasma ionization is determined by the "electron temperature" relative to the ionization energy, (and more weakly by the density), in a relationship called the Saha equation. A plasma is sometimes referred to as being "hot" if it is nearly fully ionized, or "cold" if only a small fraction, (for example 1%), of the gas molecules are ionized, but other definitions of the terms "hot plasma" and "cold plasma" are common. Even in a "cold" plasma, the electron temperature is still typically several thousand degrees Celsius. Plasmas utilized in "plasma technology" ("technological plasmas") are usually cold in this sense. [edit]Potentials


Lightning is an example of plasma present at Earth's surface. Typically, lightning discharges 30,000 amperes at up to 100 million volts, and emits light, radio waves, X-rays and even gamma rays.[14] Plasma temperatures in lightning can approach ~28,000 kelvin and electron densities may exceed 1024 m−3. Since plasmas are very good conductors, electric potentials play an important role. The potential as it exists on average in the space between charged particles, independent of the question of how it can be measured, is called the "plasma potential", or the "space potential". If an electrode is inserted into a plasma, its potential will generally lie considerably below the plasma potential due to what is termed a Debye sheath. The good electrical conductivity of plasmas causes their electric fields to be very small. This results in the important concept of "quasineutrality", which says the density of negative charges is approximately equal to the density of positive charges over large volumes of the plasma (ne = <Z>ni), but on the scale of the Debye length there can be charge imbalance. In the special case that double layers are formed, the charge separation can extend some tens of Debye lengths. The magnitude of the potentials and electric fields must be determined by means other than simply finding the net charge density. A common example is to assume that the electrons satisfy the "Boltzmann relation": . Differentiating this relation provides a means to calculate the electric field from the density: . It is possible to produce a plasma which is not quasineutral. An electron beam, for example, has only negative charges. The density of a non-neutral plasma must generally be very low, or it must be very small, otherwise it will be dissipated by the repulsive electrostatic force. In astrophysical plasmas, Debye screening prevents electric fields from directly affecting the plasma over large distances, i.e., greater than the Debye length. But the existence of charged particles causes the plasma to generate and can be affected by magnetic fields. This can and does cause extremely complex behavior, such as the generation of plasma double layers, an object which separates charge over a few tens of Debye lengths. The dynamics of plasmas interacting with external and self-generated magnetic fields are studied in the academic discipline of magnetohydrodynamics. [edit]Magnetization Plasma in which the magnetic field is strong enough to influence the motion of the charged particles is said to be magnetized. A common quantitative criterion is that a particle on average completes at least one gyration around the magnetic field before making a collision, i.e., ωce/νcoll > 1, where ωce is the "electron gyrofrequency" and νcoll is the "electron collision rate". It is often the case that the electrons are magnetized while the ions are not. Magnetized plasmas are anisotropic, meaning that their properties in the direction parallel to the magnetic field are different from those perpendicular to it. While electric fields in plasmas are usually small due to the high conductivity, the electric field associated with a plasma moving in a magnetic field is given by E = −v x B (where E is the electric field, v is the velocity, and B is the magnetic field), and is not affected by Debye shielding.[15] [edit]Comparison of plasma and gas phases Plasma is often called the fourth state of matter. It is distinct from other lower-energy states of matter; most commonly solid, liquid, and gas. Although it is closely related to the gas phase in that it also has no definite form or volume, it differs in a number of ways, including the following: Property Gas Plasma Electrical Conductivity Very low Air is an excellent insulator until it breaks down into plasma at electric field strengths above 30 kilovolts per centimeter.[16] Usually very high For many purposes, the conductivity of a plasma may be treated as infinite. Independently acting species One All gas particles behave in a similar way, influenced by gravity and by collisions with one another. Two or three Electrons, ions, protons and neutrons can be distinguished by the sign and value of their charge so that they behave independently in many circumstances, with different bulk velocities and temperatures, allowing phenomena such as new types of waves and instabilities. Velocity distribution Maxwellian Collisions usually lead to a Maxwellian velocity distribution of all gas particles, with very few relatively fast particles. Often non-Maxwellian Collisional interactions are often weak in hot plasmas and external forcing can drive the plasma far from local equilibrium and lead to a significant population of unusually fast particles. Interactions Binary Two-particle collisions are the rule, three-body collisions extremely rare. Collective Waves, or organized motion of plasma, are very important because the particles can interact at long ranges through the electric and magnetic forces. [edit]Complex plasma phenomena


The remnant of "Tycho's Supernova", a huge ball of expanding plasma. The outer shell shown in blue is X-ray emission by high-speed electrons. Although the underlying equations governing plasmas are relatively simple, plasma behavior is extraordinarily varied and subtle: the emergence of unexpected behavior from a simple model is a typical feature of a complex system. Such systems lie in some sense on the boundary between ordered and disordered behavior and cannot typically be described either by simple, smooth, mathematical functions, or by pure randomness. The spontaneous formation of interesting spatial features on a wide range of length scales is one manifestation of plasma complexity. The features are interesting, for example, because they are very sharp, spatially intermittent (the distance between features is much larger than the features themselves), or have a fractal form. Many of these features were first studied in the laboratory, and have subsequently been recognized throughout the universe. Examples of complexity and complex structures in plasmas include: [edit]Filamentation Striations or string-like structures[17] are seen in many plasmas, like the plasma ball (image to the right), the aurora,[18] lightning,[19] electric arcs, solar flares,[20] and supernova remnants.[21] They are sometimes associated with larger current densities, and the interaction with the magnetic field can form a magnetic rope structure.[22]. High power microwave breakdown at atmospheric pressure also leads to the formation of filamentary structures [23]. (See also Plasma pinch) Filamentation also refers to the self-focusing of a high power laser pulse. At high powers, the nonlinear part of the index of refraction becomes important and causes a higher index of refraction in the center of the laser beam, where the laser is brighter than at the edges, causing a feedback that focuses the laser even more. The tighter focused laser has a higher peak brightness (irradiance) that forms a plasma. The plasma has an index of refraction lower than one, and causes a defocusing of the laser beam. The interplay of the focusing index of refraction, and the defocusing plasma makes the formation of a long filament of plasma that can be micrometers to kilometers in length.[24] [edit]Shocks or double layers Plasma properties change rapidly (within a few Debye lengths) across a two-dimensional sheet in the presence of a (moving) shock or (stationary) double layer. Double layers involve localized charge separation, which causes a large potential difference across the layer, but does not generate an electric field outside the layer. Double layers separate adjacent plasma regions with different physical characteristics, and are often found in current carrying plasmas. They accelerate both ions and electrons. [edit]Electric fields and circuits Quasineutrality of a plasma requires that plasma currents close on themselves in electric circuits. Such circuits follow Kirchhoff's circuit laws and possess a resistance and inductance. These circuits must generally be treated as a strongly coupled system, with the behavior in each plasma region dependent on the entire circuit. It is this strong coupling between system elements, together with nonlinearity, which may lead to complex behavior. Electrical circuits in plasmas store inductive (magnetic) energy, and should the circuit be disrupted, for example, by a plasma instability, the inductive energy will be released as plasma heating and acceleration. This is a common explanation for the heating which takes place in the solar corona. Electric currents, and in particular, magnetic-field-aligned electric currents (which are sometimes generically referred to as "Birkeland currents"), are also observed in the Earth's aurora, and in plasma filaments. [edit]Cellular structure Narrow sheets with sharp gradients may separate regions with different properties such as magnetization, density and temperature, resulting in cell-like regions. Examples include the magnetosphere, heliosphere, and heliospheric current sheet. Hannes Alfvén wrote: "From the cosmological point of view, the most important new space research discovery is probably the cellular structure of space. As has been seen in every region of space which is accessible to in situ measurements, there are a number of 'cell walls', sheets of electric currents, which divide space into compartments with different magnetization, temperature, density, etc."[25] [edit]Critical ionization velocity The critical ionization velocity is the relative velocity between an ionized plasma and a neutral gas above which a runaway ionization process takes place. The critical ionization process is a quite general mechanism for the conversion of the kinetic energy of a rapidly streaming gas into ionization and plasma thermal energy. Critical phenomena in general are typical of complex systems, and may lead to sharp spatial or temporal features. [edit]Ultracold plasma Ultracold plasmas are created in a magneto-optical trap (MOT) by trapping and cooling neutral atoms, to temperatures of 1 mK or lower, and then using another laser to ionize the atoms by giving each of the outermost electrons just enough energy to escape the electrical attraction of its parent ion. One advantage of ultracold plasmas is their well characterized and tunable initial conditions, including size and electron temperature. By adjusting the wavelength of the ionizing laser, the kinetic energy of the liberated electrons can be tuned as low as 0.1 K, a limit set by the frequency bandwidth of the laser pulse. The ions, inherit the millikelvin temperatures of the neutral atoms, but are quickly heated through a process known as disorder induced heating (DIH). This type of non-equilibrium ultracold plasma evolves rapidly, and displays many other interesting phenomena.[26] One of the metastable states of a strongly nonideal plasma is Rydberg matter, which forms upon condensation of excited atoms. [edit]Non-neutral plasma The strength and range of the electric force and the good conductivity of plasmas usually ensure that the densities of positive and negative charges in any sizeable region are equal ("quasineutrality"). A plasma which has a significant excess of charge density, or, which is, in the extreme case, composed of only a single species, is called a non-neutral plasma. In such a plasma, electric fields play a dominant role. Examples are charged particle beams, an electron cloud in a Penning trap and positron plasmas.[27] [edit]Dusty plasma and grain plasma A dusty plasma is one containing tiny charged particles of dust (typically found in space) which also behaves like a plasma. A plasma containing larger particles is called grain plasma. [edit]Mathematical descriptions


The complex self-constricting magnetic field lines and current paths in a field-aligned Birkeland current which may develop in a plasma.[28] Main article: Plasma modeling To completely describe the state of a plasma, we would need to write down all the particle locations and velocities and describe the electromagnetic field in the plasma region. However, it is generally not practical or necessary to keep track of all the particles in a plasma. Therefore, plasma physicists commonly use less detailed descriptions, of which there are two main types: [edit]Fluid model Fluid models describe plasmas in terms of smoothed quantities, like density and averaged velocity around each position (see Plasma parameters). One simple fluid model, magnetohydrodynamics, treats the plasma as a single fluid governed by a combination of Maxwell's equations and the Navier–Stokes equations. A more general description is the two-fluid plasma picture, where the ions and electrons are described separately. Fluid models are often accurate when collisionality is sufficiently high to keep the plasma velocity distribution close to a Maxwell–Boltzmann distribution. Because fluid models usually describe the plasma in terms of a single flow at a certain temperature at each spatial location, they can neither capture velocity space structures like beams or double layers, nor resolve wave-particle effects. [edit]Kinetic model Kinetic models describe the particle velocity distribution function at each point in the plasma and therefore do not need to assume a Maxwell–Boltzmann distribution. A kinetic description is often necessary for collisionless plasmas. There are two common approaches to kinetic description of a plasma. One is based on representing the smoothed distribution function on a grid in velocity and position. The other, known as the particle-in-cell (PIC) technique, includes kinetic information by following the trajectories of a large number of individual particles. Kinetic models are generally more computationally intensive than fluid models. The Vlasov equation may be used to describe the dynamics of a system of charged particles interacting with an electromagnetic field. In magnetized plasmas, a gyrokinetic approach can substantially reduce the computational expense of a fully kinetic simulation. [edit]Artificial plasmas

Most artificial plasmas are generated by the application of electric and/or magnetic fields. Plasma generated in a laboratory setting and for industrial use can be generally categorized by: The type of power source used to generate the plasma; DC, RF and microwave. The pressure at which they operate; vacuum pressure (< 10 mTorr or 1 Pa), moderate pressure (~ 1 Torr or 100 Pa), atmospheric pressure (760 Torr or 100 kPa). The degree of ionization within the plasma; fully ionized, partially ionized, weakly ionized. The temperature relationships within the plasma: thermal plasma (Te = Tion = Tgas), non-thermal or "cold" plasma (Te >> Tion = Tgas) The electrode configuration used to generate the plasma. The magnetization of the particles within the plasma; Magnetized (both ion and electrons are trapped in Larmor orbits by the magnetic field), partially magnetized (the electrons but not the ions are trapped by the magnetic field), non-magnetized (the magnetic field is too weak to trap the particles in orbits but may generate Lorentz forces). Its application [edit]Generation of artificial plasma Just like the many uses of plasma, there are several means for its generation, however, one principle is common to all of them: there must be energy input to produce and sustain it.[29] For this case, plasma is generated when an electrical current is applied across a dielectric gas or fluid (an electrically non-conducting material) as can be seen in the image below, which shows a discharge tube to be considered as a simple example (DC used for simplicity).


Cascade process of ionization: Electrons are ‘e−’, neutral atoms ‘o’, and cations ‘+’. The potential difference and subsequent electric field causes the bound electrons (negative) to be pulled toward the anode (positive electrode) while the nucleus (positive) is pulled to the cathode (negative electrode).[30] As the voltage is increased, the current stresses the material (by electric polarization) beyond its dielectric limit (termed strength) into a stage of electrical breakdown, marked by a spark, where the material transforms from being an insulator into a conductor (as it becomes increasingly ionized). This is a stage of avalanching ionization, where collisions between electrons and neutral gas atoms, create more ions and electrons (as can be seen in the figure on the right). The first impact of an electron on an atom results in one ion and two electrons. Therefore, the number of charged particles increases rapidly (in the millions) only “after about 20 successive sets of collisions”[31], mainly due to a small mean free path (average distance travelled between collisions). With ample current density and ionization, this forms a luminous electric arc (essentially lightning) between the electrodes.[Note 1] Electrical resistance along the continuous electric arc creates heat, which ionizes more gas molecules (where degree of ionization is determined by temperature), and as per the sequence: solid-liquid-gas-plasma, the gas is gradually turned into a thermal plasma.[Note 2] A thermal plasma is in thermal equilibrium, which is to say that the temperature is relatively homogeneous throughout the heavy particles (i.e. atoms, molecules and ions) and electrons. This is so because when thermal plasmas are generated, electrical energy is given to electrons, which, due to their great mobility and large numbers, are able to disperse it rapidly and by elastic collision (without energy loss) to the heavy particles.[32][Note 3] [edit]Examples of industrial/commercial plasma Because of their sizable temperature and density ranges, plasmas find applications in many fields of research, technology and industry. For example, in: industrial and extractive metallurgy,[32] surface treatments such as thermal spraying (coating), etching in microelectronics,[33] metal cutting[34] and welding; as well as in everyday vehicle exhaust cleanup and fluorescent/luminescent lamps,[29] while even playing a part in supersonic combustion engines for aerospace engineering.[35] [edit]Low-pressure discharges Glow discharge plasmas: non-thermal plasmas generated by the application of DC or low frequency RF (<100 kHz) electric field to the gap between two metal electrodes. Probably the most common plasma; this is the type of plasma generated within fluorescent light tubes.[36] Capacitively coupled plasma (CCP): similar to glow discharge plasmas, but generated with high frequency RF electric fields, typically 13.56 MHz. These differ from glow discharges in that the sheaths are much less intense. These are widely used in the microfabrication and integrated circuit manufacturing industries for plasma etching and plasma enhanced chemical vapor deposition.[37] Inductively coupled plasma (ICP): similar to a CCP and with similar applications but the electrode consists of a coil wrapped around the discharge volume which inductively excites the plasma.[citation needed] Wave heated plasma: similar to CCP and ICP in that it is typically RF (or microwave), but is heated by both electrostatic and electromagnetic means. Examples are helicon discharge, electron cyclotron resonance (ECR), and ion cyclotron resonance (ICR). These typically require a coaxial magnetic field for wave propagation.[citation needed] [edit]Atmospheric pressure Arc discharge: this is a high power thermal discharge of very high temperature (~10,000 K). It can be generated using various power supplies. It is commonly used in metallurgical processes. For example, it is used to melt rocks containing Al2O3 to produce aluminium. Corona discharge: this is a non-thermal discharge generated by the application of high voltage to sharp electrode tips. It is commonly used in ozone generators and particle precipitators. Dielectric barrier discharge (DBD): this is a non-thermal discharge generated by the application of high voltages across small gaps wherein a non-conducting coating prevents the transition of the plasma discharge into an arc. It is often mislabeled 'Corona' discharge in industry and has similar application to corona discharges. It is also widely used in the web treatment of fabrics.[38] The application of the discharge to synthetic fabrics and plastics functionalizes the surface and allows for paints, glues and similar materials to adhere.[39] Capacitive discharge: this is a nonthermal plasma generated by the application of RF power (e.g., 13.56 MHz) to one powered electrode, with a grounded electrode held at a small separation distance on the order of 1 cm. Such discharges are commonly stabilized using a noble gas such as helium or argon.[40] [edit]Fields of active research


Hall effect thruster. The electric field in a plasma double layer is so effective at accelerating ions that electric fields are used in ion drives. This is just a partial list of topics. A more complete and organized list can be found on the web site for Plasma science and technology.[41] Plasma theory Plasma equilibria and stability Plasma interactions with waves and beams Guiding center Adiabatic invariant Debye sheath Coulomb collision Plasmas in nature The Earth's ionosphere Northern and southern (polar) lights Space plasmas, e.g. Earth's plasmasphere (an inner portion of the magnetosphere dense with plasma) Astrophysical plasma Industrial plasmas Plasma chemistry Plasma processing Plasma spray Plasma display Plasma sources Dusty plasmas Plasma diagnostics Thomson scattering Langmuir probe Spectroscopy Interferometry Ionospheric heating Incoherent scatter radar Plasma applications Fusion power Magnetic fusion energy (MFE) — tokamak, stellarator, reversed field pinch, magnetic mirror, dense plasma focus Inertial fusion energy (IFE) (also Inertial confinement fusion — ICF) Plasma-based weaponry Ion implantation Ion thruster Plasma ashing Food processing (nonthermal plasma, aka "cold plasma") Plasma arc waste disposal, convert waste into reusable material with plasma. Plasma acceleration Plasma medicine (e. g. Dentistry [42]) [edit]See also

Physics portal Look up plasma in Wiktionary, the free dictionary. Wikimedia Commons has media related to: Plasma physics Hannes Alfvén Prize Plasma channel Plasma parameters Plasma nitriding Magnetohydrodynamics (MHD) Electric field screening List of plasma physicists Important publications in plasma physics IEEE Nuclear and Plasma Sciences Society Quark-gluon plasma [edit]Notes

^ The material undergoes various ‘regimes’ or stages (e.g. saturation, breakdown, glow, transition and thermal arc) as the voltage is increased under the voltage-current relationship. The voltage rises to its maximum value in the saturation stage, and thereafter it undergoes fluctuations of the various stages; while the current progressively increases throughout.[31] ^ Across literature, there appears to be no strict definition on where the boundary is between a gas and plasma. Nevertheless, it is enough to say that at 2000°C the gas molecules become atomized, and ionized at 3000°C and "in this state, [the] gas has a liquid like viscosity at atmospheric pressure and the free electric charges confer relatively high electrical conductivities that can approach those of metals.”[32] ^ Note that non-thermal, or non-equilibrium plasmas are not as ionized and have lower energy densities, and thus the temperature is not dispersed evenly among the particles, where some heavy ones remain ‘cold’. [edit]References

^ a b Sturrock, Peter A. (1994). Plasma Physics: An Introduction to the Theory of Astrophysical, Geophysical & Laboratory Plasmas.. Cambridge University Press. ^ Crookes presented a lecture to the British Association for the Advancement of Science, in Sheffield, on Friday, 22 August 1879 [1] [2] ^ Announced in his evening lecture to the Royal Institution on Friday, 30th April 1897, and published in Philosophical Magazine 44: 293. 1897. http://web.lemoyne.edu/~GIUNTA/thomson1897.html. ^ a b I. Langmuir (1928). "Oscillations in ionized gases". Proc. Nat. Acad. Sci. U.S. 14: 628. doi:10.1073/pnas.14.8.627. ^ It is often stated that more than 99% of the material in the visible universe is plasma. See, for example, D. A. Gurnett, A. Bhattacharjee (2005). Introduction to Plasma Physics: With Space and Laboratory Applications. Cambridge, UK: Cambridge University Press. p. 2. ISBN 0521364833. and K Scherer, H Fichtner, B Heber (2005). Space Weather: The Physics Behind a Slogan. Berlin: Springer. p. 138. ISBN 3540229078.. Essentially, all of the visible light from space comes from stars, which are plasmas with a temperature such that they radiate strongly at visible wavelengths. Most of the ordinary (or baryonic) matter in the universe, however, is found in the intergalactic medium, which is also a plasma, but much hotter, so that it radiates primarily as X-rays. The current scientific consensus is that about 96% of the total energy density in the universe is not plasma or any other form of ordinary matter, but a combination of cold dark matter and dark energy. ^ IPPEX Glossary of Fusion Terms ^ Plasma fountain Source, press release: Solar Wind Squeezes Some of Earth's Atmosphere into Space ^ Hazeltine, R.D.; Waelbroeck, F.L. (2004). The Framework of Plasma Physics. Westview Press.. ^ R. O. Dendy (1990). Plasma Dynamics. Oxford University Press. ISBN 0198520417. ^ Daniel Hastings, Henry Garrett (2000). Spacecraft-Environment Interactions. Cambridge University Press. ISBN 0521471281. ^ Peratt, A. L. (1966). "Advances in Numerical Modeling of Astrophysical and Space Plasmas". Astrophysics and Space Science 242: 93–163. doi:10.1007/BF00645112. ^ See The Nonneutral Plasma Group at the University of California, San Diego ^ Nicholson, Dwight R. (1983). Introduction to Plasma Theory. John Wiley & Sons. ^ See Flashes in the Sky: Earth's Gamma-Ray Bursts Triggered by Lightning ^ Richard Fitzpatrick, Introduction to Plasma Physics, Magnetized plasmas ^ Hong, Alice (2000). "Dielectric Strength of Air". The Physics Factbook. ^ Dickel, J. R. (1990). "The Filaments in Supernova Remnants: Sheets, Strings, Ribbons, or?". Bulletin of the American Astronomical Society 22: 832. ^ Grydeland, T., et al. (2003). "Interferometric observations of filamentary structures associated with plasma instability in the auroral ionosphere". Geophysical Research Letters 30 (6): 71. doi:10.1029/2002GL016362. ^ Moss, Gregory D., et al. (2006). "Monte Carlo model for analysis of thermal runaway electrons in streamer tips in transient luminous events and streamer zones of lightning leaders". Journal of Geophysical Research 111: A02307. doi:10.1029/2005JA011350. ^ Doherty, Lowell R.; Menzel, Donald H. (1965). "Filamentary Structure in Solar Prominences.". The Astrophysical Journal 141: 251. doi:10.1086/148107. ^ Hubble views the Crab Nebula M1: The Crab Nebula Filaments ^ Zhang, Yan-An, et al. (2002). "A rope-shaped solar filament and a IIIb flare". Chinese Astronomy and Astrophysics 26 (4): 442–450. doi:10.1016/S0275-1062(02)00095-4. ^ Jean-Pierre Boeuf, Bhaskar Chaudhury, and Guo Qiang Zhu (2010). "Theory and Modeling of Self-Organization and Propagation of Filamentary Plasma Arrays in Microwave Breakdown at Atmospheric Pressure". Phys. Rev. Lett.(PRL) 104 (1): 015002. doi:10.1103/PhysRevLett.104.015002. ^ S. L. Chin (2006). "Some Fundamental Concepts of Femtosecond Laser Filamentation". Journal of the Korean Physical Society 49: 281. ^ Hannes Alfvén (1981). "section VI.13.1. Cellular Structure of Space". Cosmic Plasma. Dordrecht. ISBN 9027711518. ^ National Research Council (U.S.). Plasma 2010 Committee (2007). Plasma science: advancing knowledge in the national interest. National Academies Press. pp. 190–193. ISBN 0309109434. ^ R. G. Greaves, M. D. Tinkle, and C. M. Surko (1994). "Creation and uses of positron plasmas". Physics of Plasmas 1: 1439. doi:10.1063/1.870693. ^ See Evolution of the Solar System, 1976) ^ a b Hippler, R., Kersten, H., Schmidt, M., Schoenbach, K.M., ed (2008). "Plasma Sources". Low Temperature Plasmas: Fundamentals, Technologies, and Techniques (2 ed.). Wiley-VCH. ^ Chen, Francis F. (1984). Plasma Physics and Controlled Fusion. Plenum Press. ^ a b Leal-Quirós, Edbertho (2004). "Plasma Processing of Municipal Solid Waste". Brazilian Journal of Physics 34 (4B): 1587. ^ a b c Gomez, E., Rani, D.A., Cheeseman, C.R., Deegan, D., Wise, M., Boccaccini, A.R. (2009). "Thermal plasma technology for the treatment of wastes: A critical review". Journal of Hazardous Materials 161 (2-3): 614–626. doi:10.1016/j.jhazmat.2008.04.017. PMID 18499345. ^ National Research Council (1991). Plasma Processing of Materials : Scientific Opportunities and Technological Challenges.. National Academies Press. ^ Nemchinsky, V.A., Severance, W.S. (2006). "What we know and what we do not know about plasma arc cutting". J. Phys. D: Appl. Phys. 39,: R423–R438. doi:10.1088/0022-3727/39/22/R01. ^ Peretich, M.A., O’Brien, W.F., Schetz, J.A. (2007). Plasma torch power control for scramjet application. Virginia Space Grant Consortium. Retrieved 12 April 2010. ^ Dr. David P. Stern. "The Fluorescent Lamp: A plasma you can use.". Retrieved 2010-05-19. ^ Sobolewski, M.A.; Langan & Felker, J.G. & B.S. (1997). Electrical optimization of plasma-enhanced chemical vapor deposition chamber cleaning plasmas. 16. J. Vac. Sci. Technol. B. pp. 173–182. ^ F. Leroux et al. (2006). "Atmospheric air plasma treatments of polyester textile structures". Journal of Adhesion Science and Technology 20: 939–957. doi:10.1163/156856106777657788. ^ F. Leroux et al. (2008). "Polypropylene film chemical and physical modifications by dielectric barrier discharge plasma treatment at atmospheric pressure". Journal of Colloid and Interface Science 328 (2): 412. doi:10.1016/j.jcis.2008.09.062. PMID 18930244. ^ J. Park et al. (2001). "Discharge phenomena of an atmospheric pressure radio-frequency capacitive plasma source". Journal of Applied Physics 89: 20. doi:10.1063/1.1323753. ^ Web site for Plasma science and technology ^ "High-tech dentistry – "St Elmo's frier" – Using a plasma torch to clean your teeth". The Economist print edition. Jun 17th 2009. Retrieved 2009-09-07. [edit]External links

Free plasma physics books and notes Plasmas: the Fourth State of Matter Plasma Science and Technology Plasma on the Internet - a list of plasma related links. Introduction to Plasma Physics: Graduate course given by Richard Fitzpatrick|M.I.T. Introduction by I.H.Hutchinson Plasma Material Interaction How to make a glowing ball of plasma in your microwave with a grape|More (Video) How to make plasma in your microwave with only one match (video)